Manual Singer Quantum 9940 (page 28 of 96) (English, French, Spanish)

467663

Zoom out

Zoom in

1/96

THREADING THE MACHINE

A.PREPARING TO THREAD MACHINE

1. Raise the presser foot lifter.

2. Press the needle up/down button and set the

needle in up position.

(Keep this position until needle eye threading.)

Open the top cover and set spool as below.

B.SETTING SPOOL OF THREAD ON

SPOOL PIN

1. Pull up the left end of spool pin and set the

spool of thread on spool pin.

2. Set the spool cap on spool pin as far as it will

go.

a: Reverse spool cap direction according to the

size of spool.

b. Use the small spool cap when you use cross

wound thread. Leave small opening between

cap and spool as illustration.

C.THREADING THE UPPER THREAD

1. Hold thread in both hands and pass thread to

the guide from front opening.

2. Bring thread backward and pass through the slit

from right to left.

3. Bring thread to the left and pull down thread

toward you along the slit.

4. Pull up thread.

5. To thread the take-up lever, draw thread up and

bring thread back down again from right to left

along the slit.

6. Pull thread downward along the slit.

7. Draw thread through thread guide from right

side opening.

8. Pass through needle eye from front to back.

Refer to next page for instructions on how to

use needle threader.

9940EFSt.pm6 2003.9.10, 8:31 PM28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer Quantum 9940 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer Quantum 9940 Manual

Product: