467663
20
Zoom out
Zoom in
Previous page
1/96
Next page
20
FUNCTION OF EACH PART
A.REVERSE STITCH BUTTON
The machine will sew in reverse (at low speed)
while the button is pressed. When released,
machine will sew forward.
B.NEEDLE UP/DOWN BUTTON
Needle stop position will be changed up or down
by pressing this button.
The indicator lamp will turn on when the needle is
down position.
C.SLOW SEWING BUTTON
By pressing this button, the sewing speed will be
reduced to 1/2 and indicator lamp will turn on.
D.PRESSER FOOT LIFTER
The presser foot is lifed up or down by this lever.
NOTE:
Machine will not start when the presser foot is
lifted. (Except for bobbin winding)
E.DROP FEED LEVER
The fabric feed dogs project up through the needle
plate, directly below the presser foot. Their
function is to move the fabric being sewn. The
drop feed lever controls the fabric feed dogs.
For ordinary sewing, move the lever to the right.
This raises feed dogs to their highest position. For
most sewing, the lever should be in this position.
For darning or free motion embroidery or
whenever fabric is to be moved by hand, move the
lever to the left to lower the fabric feed dogs.
F.PRESSURE REGULATOR
The pressure on the presser foot is determined by
the weight of fabric.
To increase the pressure, turn dial to 3.
To decrease the pressure, turn dial to 1.
For ordinary sewing, turn dial to 2.
G.HAND WHEEL
By turning the hand wheel, the needle will raise or
lower. You should turn hand wheel toward you.
H.TOP COVER
To open the top cover, lift up the left side of cover.
9940EFSt.pm6 2003.9.10, 8:31 PM20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer Quantum 9940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer Quantum 9940 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info