606909
40
Zoom out
Zoom in
Previous page
1/60
Next page
38
Medium to heavyweight fabric
Tissus moyens et lourds
Material de peso medio a pesado
Under side
Envers
Reverso
Under side
Envers
Reverso
Under side
Envers
Reverso
Under side
Envers
Reverso
Fine fabric
Tissus ns
Material no
Top side
Endroit
Cara
1. With matching thread nish the raw edge. On ne fabric,
turn up and press a small ½” or less hem. On medium to
heavyweight fabrics overcast the fabric’s raw edge.
2. Now fold the fabric as illustrated with the wrong side up.
3. Place the fabric under the foot. Turn the handwheel counter
clockwise by hand until the needle swings fully to the left. It
should just pierce the fold of the fabric. If it does not, adjust
the guide (B) on the blindhem foot (A) so that the needle
just pierces the fabric fold and the guide just rests against
the fold.
Sew slowly, guiding the fabric carefully along the edge of
the guide.
4. When completed, the stitching is almost invisible on the
right side of the fabric.
BLINDHEM STITCH
Settings : Presser foot - Blind stitch foot
: Thread Tension Control: AUTO
The blindhem stitch is primarily used for hemming curtains,
trousers, skirts, etc.
B
A
1 2
1 2
3
4
NOTE: It takes practice to sew blind hems. Always
make a sewing test rst.
NOTE: In addition to the adjustment on the foot,
the stitch width control can be used. The stitch
width control changes the swing of the needle for a
more narrow or wider stitch.
-
Regular blind stitch for normal woven fabrics
-
Elastic blind stitch for soft, stretchable fabrics
MULTI-STITCH ZIGZAG
This is a strong stitch because as its name implies, it makes
three short stitches where the normal zig-zag makes only one.
For this reason it is highly recommended for overcasting all
types of fabrics.
It is also ideal for bartacks, mending tears, patching, sewing
towelling, and attaching at elastic.
SETTINGS :Presser foot - General purpose foot
:Thread tension control - AUTO
NOTE: Mending a tear or overedging as shown in
illustration requires manual adjustment of the length
control.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer One in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 8,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info