467635
27
Zoom out
Zoom in
Previous page
1/40
Next page
Abaissez le pied presseur.
Continuez la couture jusqu'à la fin.
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Relevez le pied presseur et retirez le tissu en le
faisant glisser sous le pied presseur.
Cousez en guidant le tissu de façon à ce que
le point se forme sur le bord du tissu.
51
Surjeter une couture ou un bord
12
Baje la palanca del prensatelas.
Comience a coser, guiando la tela de modo que la
puntada se forme en el borde de la tela.
Continúe cosiendo hasta que termine.
Gire el volante hacia usted hasta que la aguja esté en
la posición más alta.
Levante la palanca del prensatelas y retire la tela
debajo del prensatelas.
Puntada tipo Overlock
Lower the presser foot.
Sew, guiding the fabric so that the stitch forms
on the edge of the fabric.
Continue sewing until finished.
Turn handwheel counter clockwise until the needle is in the highest
position.
Raise presser foot lifter and slide fabric from under the presser foot.
Overedging a seam or edge
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Relevez le pied presseur et mettez le tissu sous
le pied presseur.
50
12
Surjeter une couture ou un bord
Model 4210
Modèle 4210
Modelo 4210
Model 4205/ 4210
Modèle 4205 / 4210
Modelo 4205 / 4210
Largeur du point
Largo puntada
Longueur du
point
Selector del
largo de puntada
Pour le modèle 4210, réglez la
longueur de point sur .
Pour le modèle 4205, réglez la
longueur de point sur "1”
Sélecteur de point
Selector de puntadas
5
4
0
1
2
3
S
T
R
E
T
C
H
H
T
G
N
E
L
2
4
1
3
Tension du fil d'aiguille
Tensión de hilo
Position de l'aiguille: centrale
Posición aguja: Centro
AUTO
Puntada tipo Overlock
Para modelo 4210 ajuste el Largo
de Puntada a
Para el modelo 4205 ajuste el Largo
de Puntada a “1”.
Gire el volante hacia usted hasta que la aguja esté en la
posición más alta.
Levante la palanca del prensatelas y coloque la tela
debajo del prensatelas.
Needle position: Center
Stitch width
For model 4210, set the Stitch
Length to
for model 4205 set the Stitch
Length to “1”.
Stitch length dial
Pattern selector dial
Start with the Needle thread
tension in the Auto position
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter and slide fabric under the presser foot.
Overedging a seam or edge
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer Inspiration 4205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer Inspiration 4205 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer Inspiration 4205

Singer Inspiration 4205 User Manual - German - 20 pages

Singer Inspiration 4205 User Manual - German - 40 pages

Singer Inspiration 4205 User Manual - Dutch - 20 pages

Singer Inspiration 4205 User Manual - French, Italian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info