550570
56
Zoom out
Zoom in
Previous page
1/60
Next page
54
5. PERFORMANCE CHECKLIST
GENERAL PROBLEMS
Machine does not sew.
* Power switch is turned off.
-
Turn on the switch.
* Buttonhole lever is not raised when sewing stitch patterns.
– Raise buttonhole lever.
* Buttonhole lever is not lowered when sewing buttonhole.
– Lower buttonhole lever.
* Bobbin winder is engaged. – Disengage bobbin winder (see
page 14 - 15).
* Presser foot is not lowered - Lower presser foot.
Machine jams/knocks.
* Thread is caught in hook.
-
Clean hook (see page 50 - 51).
* Needle is damaged.
-
Replace needle (see page 23).
Fabric does not move.
* Presser foot is not lowered - Lower presser foot.
* Stitch length is too short - Lengthen stitch length.
* Feed dogs are lowered - Raise feed dogs.
STITCHING PROBLEMS
Machine skips stitches.
* Needle is not all the way up into needle clamp(see page 23).
* Needle is bent or blunt. - Replace needle (see page 23).
* Machine is not threaded correctly (see page 18 - 19).
* Thread is caught in hook.
-
Clean hook (see page 50 - 51).
Stitches are irregular.
* Needle size is not correct for thread and fabric (see page 22).
* Machine is not threaded correctly (see page 18 - 19).
* Top thread tension is too loose (see page 24 - 25).
* Fabric is being pulled or pushed against machine feeding
action.
-
Guide it gently.
* Bobbin has not been wound evenly.
-
Rewind bobbin.
Needle breaks.
* Fabric is being pulled or pushed against machine feeding
action.
-
Guide it gently.
* Needle size is not correct for thread and fabric (see page 22).
* Needle is not all the way up into the needle clamp (see page
23).
* Twin needle is being used but stitch width is set too wide (see
page 52 - 53).
THREAD PROBLEMS
Thread bunches.
* Top and bobbin threads are not drawn back under presser
foot before starting seam.
-
Draw both threads back under
presser foot about 6 inches (10 cm) and hold until a few
stitches are formed.
Needle thread breaks.
* Machine is not threaded correctly (see page 18 - 19).
* Top thread tension is too tight (see page 24 - 25).
* Needle is bent.
-
Replace needle (see page 23).
* Needle size is not correct for thread and fabric (see page 22).
Bobbin thread breaks.
* Bobbin case is not threaded correctly (see page 16 - 17).
* Lint accumulates in bobbin case or hook.
-
Remove lint (see page 50 -51).
Fabric puckers.
* Top thread tension is too tight.
-
Adjust thread tension (see page 24 - 25).
* Stitch length is too long for sheer or soft fabric.
-
Shorten stitch length.
Downloaded from www.vandenborre.be
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer F One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer F One in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info