617504
14
Zoom out
Zoom in
Previous page
1/15
Next page
TROUBLE SHOOTINGTROUBLE SHOOTING
PROBLEMPROBLEM
POSSIBLE CAUSEPOSSIBLE CAUSE
SOLUTIONSOLUTION
Unit fails to steam.
Power Indicator Light
does not illuminate.
Unit fails to steam.
Power Indicator Light
does not illuminate.
Unit fails to steam.
Power Indicator
Light does illuminate.
Unit fails to steam.
Power Indicator
Light does illuminate.
Steam Burst output is
weak or intermittent.
Steam Burst output is
weak or intermittent.
Pressing Plate needs to be
cleaned.
Pressing Plate needs to be
cleaned.
Unit is damaged or malfunctioning.Unit is damaged or malfunctioning.
Water Reservoir is empty.Water Reservoir is empty.
Auto Shut-Off has engaged.Auto Shut-Off has engaged.
Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse.
Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse.
Unit is not plugged in.Unit is not plugged in.
Plug into electrical outlet.Plug into electrical outlet.
Reset Circuit Breaker/Ground Fault
Interrupter, or replace fuse. If you need
assistance, Contact a licensed electrician.
Reset Circuit Breaker/Ground Fault
Interrupter, or replace fuse. If you need
assistance, Contact a licensed electrician.
Refer to Auto Shut-Off section on page 5
of this manual for proper procedure.
Refer to Auto Shut-Off section on page 5
of this manual for proper procedure.
Refill Water Reservoir using procedures
on page 6-7 of this manual.
Refill Water Reservoir using procedures
on page 6-7 of this manual.
Please contact our customer support
department.
Please contact our customer support
department.
Refer to Cleaning the Digital Fabric
Steam Press section on page 11 of this
manual for proper procedure.
Refer to Cleaning the Digital Fabric
Steam Press section on page 11 of this
manual for proper procedure.
Before taking the unit to a service center, please check the following list of common problems for your issue. Before taking the unit to a service center, please check the following list of common problems for your issue.
1313
WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid a hazard.
WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid a hazard.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer ESP2 MAGIC STEAM PRESS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer ESP2 MAGIC STEAM PRESS in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info