617503

Singer ESP18 DIGITAL STEAM PRESS Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
5
OPERATION INSTRUCTIONS
1. Turn the ON/OFF Switch to the ”on” position,the Power Indicator Light illuminates.
2. The HEATING Light comes on, and the Temperature Digits twinkles. Identify the type
of fabric you will press and then press (+) or (-)button to select the temperature setting
that matches the fabric to be pressed.
IT IS BEST TO START WITH THE MOST DELICATE FABRICS FIRST, AS HIGHER
HEAT WILL CAUSE DAMAGE TO NYLON AND SILKS.
3. Lay fabric flat on Ironing Board.
4. A few minutes of heating time will be required to
reach selected temperature. The Digital Steam
Press is ready to press when the Temperature
Digits stop glittering. If pressing wool, you may
choose to spray with a burst of steam. This
function is available once the STEAM Light
illuminates.
NOTE: Do not activate burst of steam with unit
completely closed, as this may damage unit. Best
results are obtained if Pressing Plate is held open
approximately 75 mm above Ironing Board before
activating the burst of steam. For safety reasons, do not hold Pressing Plate open more
than 75 mm when using steam burst function.
5. To press, lower Pressing Plate gently onto fabric and Ironing Board. Hold there for 6-8
seconds, then lift up Pressing Plate. Repeat until you have achieved desired crease
and smoothness.
6. Once Pressing tasks are complete, immediately set On/Off Switch to “off” position.
TIPS PRESSING
STEAM BURST
1. Hold Pressing Plate approximately 75mm above
Ironing Board.
2. Press Steam Burst Button to release a burst of
steam onto fabric.
3. Lower Pressing Plate onto fabric, then raise once
again.
4. Repeat steps 1-3 above until fabric is smooth and
wrinkle-free.
IMPORTANT NOTE
For best results, press Steam Burst Buttons for 2
seconds and release.
STEAMING TIPS
Pressing Garments
1. Lay the garment on the Ironing Board.
2. Lower the steam plate and return to the open
position after a few seconds.
NOTE: the unit will automatically turn off the Pressing
Plate after 10 seconds in the closed position. A beep
will emit until the unit is opened. Once the unit is
opened, it will return to normal operation.
Wrinkle Removal
1. Lower th e Pressing Plate until it is slightly above the Ironing Board (about 75mm).
2. Activate the Burst of Steam with the Steam Burst Buttons on the sides of the Pressing
Handle.
3. Wait a few seconds, and activate the Burst of Steam again.
4. Lower the Pressing Plate and then raise.
5. Repeat this process until all wrinkles have been removed.
ENG
ESP18_Instruction Manual_US.indd 5 10/11/2012 6:08:55 PM
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer ESP18 DIGITAL STEAM PRESS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer ESP18 DIGITAL STEAM PRESS in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info