617397
96
Zoom out
Zoom in
Previous page
1/108
Next page
96
I.SEWING THE SELECTED PATTERNS
a. Single sequence sewing
After selecting stitches for a sequence, you can
add the tack stitch at the end of the sequence.
By doing so, the stitch sequence will sew one
time and then stop at the end of the sequence.
Note:
As letter stitch has buit-in tack stitch, you need not
add tack stitch at the end of sequence.
b. Repeat sequence sewing
After selecting stitches for a sequence, the
sequence will sew repeatedly if the tack stitch
is not added to the end of the sequence.
SEWING
1. Attach the Satin Foot when sewing decorative &
letter stitches.
2. Machine will start sewing from highlighted
pattern. You must shift the cursor to the pattern
where you wish to start sewing.
(When the “—” mark cursor is indicated on the
bottom of selected patterns, machine will start
from rst pattern.)
3. Lower the presser foot and start sewing.
Machine will indicate the sewing pattern on the
top left side of LCD.
I
J
K
K. RECALLING SELECTED PATTERNS
If you change the pattern to utility stitch,
machine will retain the combination of patterns
until the machine is turned off.
(To remain patterns if you turn off machine, see
previous page, “ To save selected patterns.)
To recall these patterns, touch the decorative
or letter stitch button. Machine will recall the
selected patterns.
(Thread tension will return to pre-set.)
J. SEWING PATTERN FROM BEGINNING
a. When you stop sewing at the middle of
selected patterns, LCD will indicate arrow
mark “
” on the left side.
This mark means that sewing is interrupted.
You can continue sewing by starting the
machine again.
b. When you have stopped sewing at the
middle of selected patterns, and if you have
raised the presser foot lifter, the arrow mark
will change to “
”,
At this time, when you start sewing again,
machine will sew from the beginning of
interrupted pattern.
c. If you want to sew from the beginning of all
patterns, shift the cursor by using the cursor
buttons. (Arrow icon will disappear)
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 9985 QUANTUM STYLIST TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9985 QUANTUM STYLIST TOUCH in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info