617397
76
Zoom out
Zoom in
Previous page
1/108
Next page
76
AUTOMATIC BAR-TACK
AND DARNING
You can sew automatic bar-tack and darning using
the buttonhole foot.
No. 118 Bar-tack, to reinforce areas that will be
subject to strain, such as pocket corners.
No. 119 Darning, mending and other applications.
Buttonhole Foot (F)
1. Adjust slide on base of buttonhole foot
according to the length of the bar-tack or
darning to be sewn.
a= Length of bar-tack or darning
2. Pass upper thread through the hole of
buttonhole foot and bring upper thread to the
left.
3. Position fabric under presser foot so that the
starting point is on the thick area.
Lower the foot.
b. When sewing the bar-tack on the edge of thick
fabric, such as a pocket, place a cardboard or
fabric piece of the same thickness beside the
fabric to help keep the foot level as you sew.
4. Lower the buttonhole lever completely.
Note:
Machine will not start to sew if buttonhole lever
is not lowered properly or buttonhole foot is not
positioned correctly.
5. Hold upper thread lightly and start the machine.
6. Machine will sew bar-tack or darning stitch as
shown. Machine will stop automatically when
the pattern is nished.
7. Press the thread cutter button and raise the
presser foot lifter to remove the fabric.
1 2 3 4
1 2
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 9985 QUANTUM STYLIST TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9985 QUANTUM STYLIST TOUCH in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info