616294
21
Zoom out
Zoom in
Previous page
1/47
Next page
5, 6, 8, 10 Stitch Sewing Machines
Starting a seam
Place fabric under presser foot 1/2 inch (12 mm) from
rear of fabric. Align the right edge with one of the
seam guidelines on the throat plate. Lower the
presser foot
Backstitch to the edge of the fabric for reinforcement
by pushing in the reverse button located in center of
the stitch length dial. Hold button in until stitching
reaches edge of fabric.
Release push button for forward stitching.
Guiding and supporting fabric
Most fabrics need only to be guided in front of the
presser foot. Some fabrics, however, require support
while being stitched.
* For tricot, and other similar synthetic knits, apply
gentle tension by holding the fabric at the front and
back of presser foot as you sew. Do not pull fabric.
* For elastisized fabric, stretch lace, and knits with an
unusual amount of elasticity, hold the fabric firmly in
front and back of the presser foot to stretch the seam
as the stitches are being placed.
Sewing in reverse
To neaten the end of a seam, push in the reverse
button and backstitch 3-4 stitches. Raise needle and
presser foot and remove fabric by drawing it to the
back and left. Cut thread on thread cutter on presser
bar.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 9812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9812 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info