616697
64
Zoom out
Zoom in
Previous page
1/91
Next page
5
This foot is used to trim excess material while sewing.
1. Attach the , making sure the cutter's "arm" fits around the needle clamp. Tighten the
thumb screw, securing the foot.
2. Slowly turn the handwheel towards you; the needle should go over the stitch finger on the foot.
If the needle is hitting the metal stitch finger or metal side, then widen or narrow the stitch width.
Never use a straight stitch.
3. Cut a 1/2" wide by 1"deep notch at the top edge of your fabric.
4. Place the fabric OVE
orks best if no more than 1/2" is
being trimmed.
R the first metal platform and then UNDER the second metal platform. If the
foot is not cutting, it is usually because the material is not placed OVER the first metal platform.
5. Sew slowly and gently guide the fabric. The foot w
Cut & Hem
Cut & Hem
* The is an optional accessory.Cut & Hem
59
B-10
5.0~7.0
2.0~4.5
7
CUT & HEM
This foot includes a built-in roller to help feed difficult-to-sew fabrics such as leather, suede and
vinyl.
1. Manually lead the thread from the needle through the opening of the foot, and then slip the
thread under and behind the foot.
2. Use double-faced (basting) tape to hold the fabric pieces together for sewing, which will prevent
either layer from slipping.
3. Place fabric under the presser foot. Lower the presser foot and sew.
* The roller foot is an optional accessory.
ROLLER FOOT
1
3.0~4.5
* The s is an optional accessory.traight stitch foot
STRAIGHT STITCH FOOT
This foot is used when sewing lightweight fabrics, such as chiffon and silk. It will help prevent the
fabric from being pulled into the needle plate opening.
1. Set the machine for straight stitch, center needle position. Verify that the needle will line up with
the opening of the foot before starting to sew.
2. Sew slowly and guide the layers.
1
2.5
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 9340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9340 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info