Manual Singer 9032 (page 15 of 44) (English)

616561

Zoom out

Zoom in

1/44

INSERTING A WOUND BOBBIN

To insert a bobbin, follow the instructions below.

• Raise presser foot.

• Turn hand wheel toward you until needle is in its

highest position.

• Open slide plate and remove bobbin.

1. Pull 4" (10cm) of thread from replacement bobbin

and insert bobbin into case, as shown.

2. Holding bobbin in place, guide thread into notch (1),

and then into notch (2).

3. Draw several inches of thread across bobbin.

4. While holding thread on outside, close slide plate.

• Follow directions for "Raising Bobbin Thread."

Hi, I have a Singer 9032, how do I thread it? In a few easy steps. Thanks Submitted on 4-5-2020 at 02:25
Reply Report abuse
I took out the presser foot lifter and can't attach it back to machine
Submitted on 3-5-2020 at 02:26
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9032 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 9032 Manual

Product: