Manual Singer 9008 (page 27 of 44) (English)

616462

Zoom out

Zoom in

1/44

MULTI-STITCH ZIG ZAG

Mending, overcasting, joining or reinforcing can all be

done using the Multi-Stitch Zig-Zag.

MENDING A TEAR

• Trim ragged edges of tear.

• Cut a lining of fabric for reinforcement.

• Bring the edges of tear together and baste lining to

wrong side of fabric.

RECOMMENDED SETTINGS

Stitch Selection: Multi-Stitch Zig-Zag

Stitch Width:

Stitch Length:

Foot: Special Purpose (J)

Needle Plate: General Purpose(A)

• Place tear, right side up, under presser foot.

• Stitch over the line of the tear, shortening stitch

length at each end for reinforcement.

• Trim thread ends close to fabric.

• If needed, sew over tear again.

• Trim away lining close to stitching.

The pattern selector wheel will not turn. I took the top off the machine and can't see anything that would is holding it. Can you help? It is a Model 9008.

Submitted on 29-8-2021 at 23:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9008 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 9008 Manual

Product: