Manual Singer 9008 (page 12 of 44) (English)

616462

Zoom out

Zoom in

1/44

REPLACING PRESSER FOOT WITH SHANK

Presser feet with built-in shanks can be replaced as

follows:

• Turn machine off.

• Raise needle and presser foot.

• Loosen presser foot screw (1) and remove presser

foot with shank (2), guiding it toward you and to the

right.

• To replace presser foot with shank, hook shank

around the presser bar and tighten presser foot

screw.

ATTACHING FEED COVER (F)

The feed cover keeps the feed from moving the fabric.

• Raise needle and presser foot.

• Open slide plate.

• Slide feed cover on top of needle plate, pressing tabs

(1) and (2) into holes.

• Close slide plate.

• To remove, open slide plate and lift front edge of

cover; pull it away.

The pattern selector wheel will not turn. I took the top off the machine and can't see anything that would is holding it. Can you help? It is a Model 9008.

Submitted on 29-8-2021 at 23:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 9008 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 9008 Manual

Product: