12
Spool pin cap
&RXYUH¿O
Tapa del pasador carrete
Spool
Bobine
Carrete
Spool pin
Porte-bobine
Pasador carrete
Spool pin felt discs
Rondelle feutre
Disco del pasador carrete
Vertical spool pin
Porte-bobine vertical
Pasador de carrete vertical
Spool
Bobine
Carrete
SPOOL PINS
HORIZONTAL SPOOL PIN for normal
thread spools
Place thread spool on the pin and secure with a spool cap to
HQVXUHVPRRWKÀRZRIWKUHDG,IWKHWKUHDGVSRROKDVDWKUHDG
retaining slit, it should be placed to the right.
Select the correct spool pin cap according to the type and
diameter of spool being used. The diameter of the spool pin
cap should always be larger than that of the spool itself.
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove
fabric.
3. Lift it to its highest position to change the presser foot or to
remove thick fabric.
DARNING PLATE
Use the darning plate when you need to control fabric feeding
for button sewing, free motion work and free motion darning.
Raise needle and presser foot, and position darning plate onto
the needle plate with the two pins on the back inserted to the
holes of needle plate.
CONVERTING TO FREE-ARM SEWING
<RXUPDFKLQHFDQEHXVHGHLWKHUDVDÀDWEHGRUDVDIUHH
arm model.
With the extension table in position, it provides a large working
VXUIDFHDVDVWDQGDUGÀDWEHGPRGHO
7RUHPRYHWKHH[WHQVLRQWDEOHKROGLW¿UPO\ZLWKERWKKDQGV
and pull it off to the left as shown. To replace, slide the
extension table back into place until it clicks.
With the extension table removed the machine converts into
a slim free-arm model for sewing children’s clothes, cuffs,
trouser legs, and other awkward places.
VERTICAL SPOOL PIN for large thread
spools
Attach the spool pin and place a felt disc over it. Place a spool
of thread on the spool pin.
Thread retaining slot
)HQWHGHUHWHQXHGH¿O
Ranura de retención de hilo