459436
43
Zoom out
Zoom in
Previous page
1/74
Next page
43
POINT ZIGZAG
Le l supérieur peut paraître sur l’envers, en fonction du l, du
tissu et de la vitesse de couture, mais le l de la canette ne
doit jamais paraître sur l’endroit.
Si le fil de la canette tire vers le haut ou si des fronces se
produisent, réduisez légèrement la tension à l’aide de la
commande de tension du l.
RÉGLAGES :Pied presseur - Pied universel
:Réglage tension du l supérieur - AUTO
Une case gris foncé indique la valeur automatique/par
défaut réglée automatiquement lors de la sélection du
motif.
Pour le motif zigzag, la longueur du point est de 2 mm
et la largeur du point est de 5 mm.
La case gris clair indique toutes les options de
préférences personnelles disponibles pouvant être
réglées manuellement.
RÉGLAGE DE LA LARGEUR ET DE LA
LONGUEUR DE POINT
PUNTADA ZIG-ZAG
El hilo superior puede aparecer en la parte inferior, según el
hilo, tejido, tipo de puntada y velocidad de costura, pero el hilo
de la bobina nunca deberá aparecer en la parte superior del
tejido.
Si el hilo de la bobina está tirando hacia arriba o si tiene
problemas con la formación de arrugas, reduzca ligeramente
la tensión con el control de tensión de hilo.
AJUSTES :Pie prensatelas - Pie universal
:Control tensión hilo - AUTO
La casilla gris oscuro indica el valor automático/
por defecto ajustado automáticamente cuando se
selecciona el patrón.
Para el patrón de zigzag el largo de puntada es 2 mm y
el ancho de puntada es 5 mm.
La casilla gris clara indica todas las opciones de
preferencia personal disponibles para ajustar
manualmente.
AJUSTE DEL ANCHO Y LARGO DE
PUNTADA
POSITIONNEMENT DES MOTIFS
La largeur du point bourdon augmente par rapport à la
position de l’aiguille centrale; pour créer un centre effilé
comme illustrée.
POINT BOURDON
Ceci est un point très rapprocher pour appliqué et bride, etc.
Lorsque vous utilisez ce point, pensez à diminuer la tension
supérieure. Régler la longueur de point entre 0.5 et 2.0.
Plus le point est large, plus la tension doit être diminuée.
Utiliser un entoilage pour éviter les fronces.
UBICACION DE LOS PATRONES
La puntada de satín aumenta cuando la aguja está
posicionada al centro; posibilitando crear una puntada
delgada, como se muestra.
PUNTADA DE RELLENO
Esta es una puntada compactamente espaciada para
aplicaciones, remates, etc. Para la puntada de relleno aojar
ligeramente la tensión del hilo superior. Usar un estabilizador
o cubierta para evitar fruncidos.
REMARQUE: Lorsque vous cousez un point bourdon
dense points serrés), IL FAUT utiliser le pied pour
point bourdon.
NOTA: Al coser una puntada en satén densa (poco
espaciada), se DEBE usar el prensatelas para coser
en satén.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 7256 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 7256 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info