Manual Singer 7256 (page 20 of 74) (English, French, Spanish)

459436

Zoom out

Zoom in

1/74

B. Turn the hand wheel toward you until the needle is in its

highest position.

THREADING THE TOP THREAD

A. Raise the presser foot lifter. Always be sure to raise the

presser foot lifter before threading the top thread. (If the

presser foot lifter is not raised, correct thread tension

cannot be obtained.)

C. Thread the machine with your left hand while rmly gripping

the thread with your right hand in the following order as

illustrated.

* Guide the thread through thread guide (1), and then pull

it into the pre-tension guide (2).

* Pull the thread into the tension discs (which are located

inside the machine) by rst passing the thread to the left

of plate (2). Then guide the thread to the bottom of the

groove.

* Do a U-turn around the inside of the tab (3).

* Pass the thread through the thread take-up (4) from right

to left.

* Pull the thread into the inside of the take-up lever until it

reaches the eye of the lever.

* Guide the thread into the thread guide (5).

* Pass the thread through the eye of the needle (6) from

front to back. (See following page for instructions on

operation of the Automatic Needle Threader.)

IMPORTANT:

To verify that the machine is threaded

properly in the tension discs, do this simple

check:

1.) With the presser foot raised and the

needle unthreaded, pull the thread. You

should detect only a slight resistance

and little or no deection of the needle.

2.) Now lower the presser foot and again

pull the thread towards the back of the

machine. This time you should detect a

considerable amount of resistance and

much more deflection of the needle.

If you do not detect the resistance,

this means you have not threaded the

machine correctly and need to rethread

it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 7256 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 7256 Manual

Product: