459430
38
Zoom out
Zoom in
Previous page
1/64
Next page
36
STRAIGHT STITCHING
POINT DROIT
PUNTADA RECTA
Straight stitch is most frequently used for all types of sewing. Let’s begin by following the
steps below.
NOTE:Basedupontheweightofthefabric,slight“netuning”ofthetension
may be desired.
A.Thread tension control
B. Reverse stitch button
C. Presser foot lifter
1.SETTINGS
Presser foot - General Purpose Foot
Thread tension control - 5
6. First turn the handwheel toward you (counter-clockwise) until the needle is at its highest
position. Raise the presser foot, draw materials to the rear and cut off excess thread
with the thread cutter located on the bottom of face cover as shown.
2. Pull both threads under the presser foot toward the back of the machine, leaving about 6”
(15cm) clear.
3. Place the fabric under the presser foot and lower the presser foot lifter.
4. Turn the hand wheel toward you (counter-clockwise) until the needle enters the fabric.
5. Start the machine. Guide the fabric gently with your hands. When reaching the edge of
the material, stop the sewing machine.
NOTE: To secure the stitching and avoid raveling, press the reverse stitch switch
and sew a few stitches at the start and end of the seam.
NOTE: The Needle Plate has both Metric and Inch Markings as an aid for guiding
your fabric when sewing a seam.
1. RÉGLAGES
Pied presseur - Pied universel
Réglage tension du l supérieur - 5
Le point droit est le point le plus utilisé pour toute genre de couture. Apprenez à vous
servir correctement de votre machine, en suivant les étapes ci-dessous.
REMARQUE: en fonction du poids du tissu, unelégère“miseaupointne”dela
tension peut être nécessaire.
A. Réglage tension du l supérieur
B. Touche couture arrière
C. Levier du pied presseur
6. Tourner d’abord le volant vers vous (sens antihoraire) jusqu’à ce que l’aiguille arrive
à sa position la plus haute, puis relever le pied presseur, tirer le tissu vers l’arrière et
couper la longueur de l excessive au moyen du coupe l placé au bas de la plaque
frontale, comme indiqué sur l’illustration.
REMARQUE: la plaque d’aiguille est dotée de marques métriques et en pouces pour
faciliter le guidage du tissu lors que vous piquez la couture.
2. Tirez les deux ls sous le pied presseur vers l’arrière de la machine, en laissant environ
15 cm de l.
3. Placer le tissu sous le pied presseur et abaisser le pied.
4. Tourner le volant vers vous(sens antihoraire) jusqu’à ce que l’aiguille pénètre dans le
tissu.
5. Démarrez la machine. Guidez le tissu légèrement avec les mains. Lorsque vous arrivez
au bord du tissu, arrêtez la machine à coudre.
REMARQUE: pour sécuriser la couture et éviter les eflochages, appuyez sur le bouton
de couture arrière et effectuez la couture de quelques points au début et à la n de la
couture.
100 stitch model :
80 stitch model :
60 stitch model :
00
00
00
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 6199 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 6199 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 6199

Singer 6199 User Manual - German, Italian - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info