617062
59
Zoom out
Zoom in
Previous page
1/64
Next page
57
After using, keep sewing machine and footcontroller clean, use dry rags to remove
dust from the sewing machine and footcontroller.
NOTE: Use dry rags to avoid electrical shock.
Après l'utilisation, garder la machine à coudre et le rhéostat propre, utilisez un chiffon sec
pour enlever la poussière sur la machine et le rhéostat.
Después de usar, máquina de coser de la subsistencia y regulador del pie limpio. Utilice los
trapos secos para quitar el polvo de la máquina de coser y del regulador del pie.
REMARQUE: employez des chiffons secs pour éviter un choc électrique.
NOTE: Utilice los trapos secos para evitar choque eléctrico.
CLEANING THE FEED DOGS AND SHUTTLE AREA
NETTOYAGE DES GRIFFES ET AUTOUR DE LA NAVETTE
LIMPIAR EL ÁREA DEL TRANSPORTADOR Y LA LANZADERA
1.Remove the bobbin case from the shuttle.
2.Push aside the two shuttle keepers.
3.Remove the shuttle race cover and shuttle.
1.Be sure the shuttle race forms a half moon on the left side of the machine.
2.Holding the shuttle by its center pin, replace it so as to form a half moon on the right side.
3.Slide the shuttle race cover back into position.
4.Snap the shuttle keepers back into position.
NOTE:Put a drop of sewing machine oil on the center pin of the shuttle and
shuttle
race as indicated by the arrows.
A.
B.
C.
D.
Raise the needle to its highest position.
Clean the feed dogs and shuttle area with the lint brush.
1. Enlevez la boîte à canette de la coursière.
2. Poussez de chaque côtés les deux taquets.
3. Enlevez le couvercle de la coursière et la navette.
1.
Bien vérier que la coursière forme une demi lune à gauche de la machine.
2.
En tenant la navette par le centre, la replacer pour reformer la demi lune
du côté droit.
3.
Positionnez le cache-coursière correctement sur la navette.
4.
Repoussez les deux taquets à leur place pour tenir l’ensemble.
A.
B.
C.
D.
REMARQUE: mettre une goutte d’huile pour machine à coudre sur le doigt au
centre de la coursière, comme indiqué par la èche.
Relevez l’aiguille à sa position la plus haute.
Nettoyer les griffes et l'emplacement de la navette avec la brosse.
1. Sacar la cápsula de portabobina de la lanzadera.
2. Empujar los dos soportes de lanzadera a cada lado.
3. Sacar la cubierta del carril de lanzadera y la lanzadera.
1.
Hay que poner el carril de la lanzadera formando una media luna subre el lado izquerdo de la máquina.
2.
Soportando la lanzadera con el eje central, reponerlo formando una media luna sobre el lado derecho.
3.
Deslizar la cubierta del carril de la lanzadera a su posición.
4.
Echar los soportes de la lanzadera a su posición.
A.
B.
C.
D.
Levanta la aguja a la posición más alta.
Limpiar el área del transportador y de la lanzadera con el cepillo de hilachas.
ATENCION:Echar una gota de aceite para máquina de coser por el eje central de
lanzadera y el carril de lanzadera como está indicado con las echas.
Cleaning the sewing machine and foot controller
Nettoyage de la machine à coudre et du rhéostat
Limpieza de la máquina de coser y del regulador del pie
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info