617062
42
Zoom out
Zoom in
Previous page
1/64
Next page
40
Under side
Côté de dessous
Reverso
Top side
Côté de dessus
Cara
SETTINGS
:
Presser foot - General Purpose Foot
:Thread tension control - 5
The light grey boxes indicate all
the possible personal preference
options available to set manually.
Dark grey box indicates the 5/
default value set automatically
when the pattern is selected.
For the zigzag pattern the stitch length is 2
mm and the stitch width is 5 mm.
ADJUSTING STITCH WIDTH AND LENGTH
STITCH LENGTH
LONGUEUR DU POINT
LARGO PUNTADA
STITCH WIDTH
LARGEUR DU POINT
ANCHO PUNTADA
mm 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0
0.3
0.5
0.8
1.0
1.3
1.5
1.8
2.0
2.5
3.0
RÉGLAGES :Pied presseur - Pied universel
:Réglage de la tension du
l supérieur - 5
Les cases gris clair indique toutes les
options de préférences personnelles
disponibles pouvant être réglées
manuellement.
Une case gris foncé indique la valeur
automatique / par défaut réglée
automatiquement lors de la sélection du
motif.
Pour le motif zigzag, la longueur du point est
de 2 mm et la largeur du point est de 5 mm.
RÉGLAGE DE LA LARGEUR ET DE LA LONGUEUR DU POINT
AJUSTES :Pie prensatelas - Pie universal
:Control tensión hilo - 5
La casilla gris clara indica todas las opciones
de preferencia personal disponibles para ajustar
manualmente.
La casilla gris oscuro indica el valor automático/
por defecto ajustado automáticamente cuando
se selecciona el patrón.
Para el patrón de zigzag el largo de puntada es
2 mm y el ancho de puntada es 5 mm.
AJUSTE DEL ANCHO Y LARGO DE
PUNTADA
ZIGZAG STITCHING
POINT ZIGZAG
PUNTADA ZIG-ZAG
Le l supérieur peut paraître sur l’envers,
selon le l, le tissu et la vitesse de couture,
mais le fil de la canette ne doit jamais
paraître sur l’endroit.
Si le l de la canette tire vers le haut ou
si des fronces se produisent, réduisez
légèrement la tension à l’aide de la
commande de réglage de la tension du
l supérieure.
The top thread may appear on the bottom
depending on the thread, fabric, type of
stitch and sewing speed, but the bobbin
thread must never appear on the top of the
fabric.
If bobbin thread is pulling to the top or you
are experiencing puckering, slightly reduce
the tension with the thread tension control.
El hilo superior puede aparecer en la parte
inferior, según el hilo, tejido, tipo de puntada y
velocidad de costura, pero el hilo de la bobina
nunca deberá aparecer en la parte superior del
tejido.
Si el hilo de la bobina está tirando hacia arriba
o si tiene problemas con la formación de
arrugas, reduzca ligeramente la tensión con el
control de tensión de hilo.
100 stitch model :
80 stitch model :
60 stitch model :
03
03
03
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info