617062
30
Zoom out
Zoom in
Previous page
1/64
Next page
28
BOBBIN THREAD TENSION REQUIRES
ADJUSTMENT LESS FREQUENTLY THAN THE
TOP THREAD TENSION.
If the tension is well balanced, but the fabric
puckers badly, both top and bobbin thread
tensions may be too tight and have to be adjusted.
To test if the bobbin thread tension is correct,
suspend the bobbin case by the thread and jerk
it once. Correct bobbin tension will result in the
thread unwinding only one or two inches. If too
loose it will unwind continuously. If too tight the
thread will not unwind at all. When adjusting the
tension on the bobbin case, make only slight
adjustments with a screwdriver.
Decrease
Augmentez ou
diminuez la tension
Disminuir
Presser foot lifter
Levier de verrouillage
du pied
Palanca pie prensatelas
1
3
2
Foot holder
Support du pied.
Sujetador prensatelas
ADJUSTING BOBBIN THREAD TENSION
Foot release lever
Palanca de desprendimiento
prensatelas
Levier de verrouillage
du pied.
Fabric puckers
La couture est froncée.
El tojido se arruga
Increase
Mouvement de
de bas en haut.
Aumentar
1. Poussez le levier de verrouillage et enlevez le pied.
2. Placez le pied choisi sur la plaque d'aiguille
comme illustré.
3. Rabaissez le levier du pied presseur de façon à
ce que le pied s’enclenche de lui même sur son
support.
1. Oprimir la palanca de
desprendimiento del prensatelas para
sacar el prensatelas.
2. Colocar el prensatelas deseado sobre la
placa aguja, alineando los agujeros aguja.
3. Bajar la palanca pie prensatelas, de
manera que el sujetador prensatelas se
cierre de golpe en el prensatelas.
RÉGLAGE DE LA TENSION DU FIL INFÉRIEUR
AJUSTE DE LA TENSION DEL HILO DE LA BOBINA
Le l de la canette ne nécessite pas d’ajustements
aussi fréquents que pour le l supérieur.
Si la tension est bien balancée, mais que le tissu
plisse énormément, il se peut que la tension du l
supérieur et inférieur soit trop forte et doive être
ajustée.
Pour vérier si le l de la canette est bien équilibré,
suspendre le boîtier de la cannette en le retenant
par le l et faite une seule fois un mouvement de
bas en haut. Une tension équilibrée fera que la
canette se dévidera de 2 à 3 cm (1 à 2 po).
Si la tension est trop lâche la canette se dévidera
continuellement.
Si la tension est trop serrée la canette ne se
dévidera pas.
Lorsque vous devez ajuster la tension du
boîtier de la canette, faites seulement un petit
ajustement avec un tournevis.
LA TENSION DEL HILO DE LA
BOBINA REQUIERE AJUSTE
MENOS FRECUENTE QUE LA
TENSION DEL HILO SUPERIOR.
Si la tensión está bien equilibrada, pero el
tejido se arruga mucho, ambas tensiones
del hilo superior e inferior, pueden estar
demasiado apretadas y se tendrán que
ajustar. Para probar si es correcta la
tensión del hilo de la bobina, suspender
la cápsula bobina por el hilo y sacudirla
una vez. Si la tensión de la bobina es
correcta, el hilo se desenrollará una o
dos pulgadas. Si es demasiado floja
se desenrollará por completo. Si es
demasiado fuerte el hilo no se llegará a
desenrollar en ningún momento.
Cuando se está ajustando la tensión en
la cápsula bobina, realizar sólo unos
ajustes ligeros con un destornillador.
CHANGING PRESSER FOOT
Be sure needle is in the up position.
Raise presser foot lifter.
1. Push presser foot release lever to remove the
foot.
2. Place the desired foot on the needle plate
aligning the presser foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot
holder snaps on the foot.
REMPLACEMENT DU PIED PRESSEUR
CAMBIO DEL PIE PRENSATELAS
Relevez l’aiguille au maximum, ainsi que le levier
du pied presseur.
Asegurarse de que la aguja está en la
posición más alta. Alzar la palanca del
pie prensatelas.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info