617062
17
Zoom out
Zoom in
Previous page
1/64
Next page
15
4
1
3
2
1. Place a spool of thread on the spool
pin, and secure it with the spool pin cap.
Pull the thread out from the spool and
place it through thread guides as shown
in illustration.Be sure to pull thread
securely into the bobbin winding tension
disk.
2.Put end of thread through the hole in
bobbin as shown.Push bobbin winder
shaft to far left position, if it is not already
there.
3. Place bobbin onto shaft with end of
thread coming from top of bobbin. Push
bobbin winder shaft to the right until it
clicks. Hold the end of thread.
4. Start machine and the bobbin starts
to wind. Bobbin will automatically stop
turning when completely filled. Push
shaft to the left to remove bobbin and cut
thread.
WINDING THE BOBBIN
Be sure to use Class 15 bobbins.
1. Placez une bobine de fil sur un porte-
bobine et fixez-la correctement à
l’aide du chapeau de bobine. Tirez le
l hors de la bobine et faites-le passer
par le guide-fil, comme indiqué dans
l’illustration. Assurez-vous de bien
insérer le l dans les disques de tension
du bobineur.
2. Faites passer l’extrémité du fil par le
trou de la canette, comme indiqué.
Assurez-vous que l’axe du dévidoir est à
gauche ou déplacer le vers la gauche,
placer la canette sur cet axe.
3. Poussez le tout vers la droite jusqu’au
déclic. Tenez le bout de fil à la
verticale.
4. Mettez la machine en marche. La
canette va se remplir. Dès que la
canette est pleine, elle s’arrêtera de
tourner. Poussez l'axe vers la gauche
pour pouvoir enlever la canette et
couper le l.
Assurez-vous d'utiliser des bobines de
type « Classe 15 »
Este seguro de usar bobinas clase 15.
PRÉPARATION DE LA CANETTE
1. Coloque el carrete de hilo en el porta carrete
y asegúrelo con la tapa de pasador de carrete.
Tire del hilo hacia afuera del carrete y páselo
a través de las guías de hilo tal como se
indica en la gura.
Asegúrese de jalar el hilo con rmeza en los
discos de tensión del devanador de bobina.
2. Pase el extremo del hilo a través del agujero
en la bobina tal como se indica. Empujar el
eje del devanador bobina hacia la posición
maxima izquierda, si no está ya ahi.
3. Colocar la bobina en el eje, con el extremo
del hilo saliendo por la parte superior de la
bobina. Empujar hacia la derecha el eje del
devanador, hasta que se sienta un golpe seco.
Retener el extremo del hilo.
4. Poner en marcha la máquina. El hilo que está
sosteniendo se cortará. La bobina cesará de
girar cuando se haya llenado por completo.
Empujar hacia la izquierda el eje para sacar
la bobina.
DEVANADO DE LA BOBINA
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 5400 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 5400

Singer 5400 User Manual - German, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info