Manual Singer 4562 (page 22 of 44) (English)

616559

22

Zoom out

Zoom in

Previous page

1/44

Next page

22

SECTION 4

S P E C I A LS T I T C H E S

The Special Stitches on your machine have a variety of practi-

cal and decorative uses. In this section are recommended

applications for each stitch. However, these stitches can be

used for many other sewing projects.

ADJUSTING STITCH WIDTH

To widen or narrow a Special Stitch pattern, move the stitch

width lever off Straight Stitch, toward any other width setting at

the right.

ADJUSTING STITCH LENGTH

The stitch length indicator is numbered 0 to 4. The area

between 0 and 1 will produce very dense stitching. For more

open stitching, slide the stitch length lever anywhere from 2 to

4. When sewing special color coded stitches. The length

M U S T be set in the 3-1/2 to 4 area.

ADJUSTING THREAD TENSION

Some Special Stitch patterns may require looser thread ten-

sion than others. To find the proper tension for your applica-

tion, make a test sample with the thread and fabric you will be

u s i n g .

ADJUSTING STITCH BALANCE

You can adjust the appearance of special color coded stitch

patterns on the display panel, by turning the Stitch balance

ring (1) behind the pattern selector dial (2) .

Acorrectly balanced Fagoting Stitch should appear as illus-

trated (3) .

When stitches are too close together (4), separate them by

turning the stitch balance ring to the right.

When stitches are too far apart (5), bring them closer

together by turning the stitch balance ring to the left.

1

thread continues to look like a birds nest on back of fabric. Tension????? Submitted on 2-6-2022 at 20:31
Reply Report abuse
- Mine started this and I took it to be repaired - the tension control had to be replaced. When I got it back - it still did that - but the tension control had been fixed so I was able to adjust the stitches to be tighter. Try the tension. Answered on 12-7-2022 at 13:32
  Vote up Report abuse
is there lights on Singer 4562 to select abuilt in stitch patterns Submitted on 31-5-2022 at 22:57
Reply Report abuse
- My machine has never had a light - it has a red dot that is very hard to see. Answered on 12-7-2022 at 13:35
  Vote up Report abuse
I did not see anything about oiling the machine. Do you oil it an if so where do you oil it Submitted on 11-5-2021 at 02:47
Reply Report abuse
how to adjust tension on presser foot on singer 4562 Submitted on 4-5-2020 at 17:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Singer 4562 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4562 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info