616559

Singer 4562 Manual

19
Zoom out
Zoom in
Previous page
1/44
Next page
19
SEWING A SEAM
You can sew seams easily and accurately when you
follow the suggestions below.
BASTING
Pin basting and hand basting are easy ways to make
temporary seams before machine sewing.
• To pin baste, insert pins at stitching line. NEVER
place pins on the underside of fabric in contact with
the feed. Do not sew over pins; pull them out as
you stitch.
• To hand baste, make long, loose stitches that can be
easily removed.
PLACING FABRIC UNDER PRESSER FOOT
• To place fabric under presser foot, raise presser foot
lifter (1) to its "up" position (2), where it locks in
place.
• The lifter can be raised and held in the "extra high"
position (3) for bulky fabrics.
STITCHING IN REVERSE
• To reinforce beginnings or ends of seams, push in
reverse lever (1). Machine will straight stitch in
reverse for as long as you hold the lever in.
• For continuous reverse stitching, push lever in and
slide it to the left to lock. Unlock reverse lever by slid-
ing it back to the right and letting it return to its nor-
mal position.
… 19 …


Need help? Post your question in this forum.

Forumrules
1

Forum

singer-4562

Reset search

  • thread continues to look like a birds nest on back of fabric. Tension????? Submitted on 2-6-2022 at 20:31

    Reply Report abuse

    • Mine started this and I took it to be repaired - the tension control had to be replaced. When I got it back - it still did that - but the tension control had been fixed so I was able to adjust the stitches to be tighter. Try the tension. Answered on 12-7-2022 at 13:32

      Vote up Report abuse

  • is there lights on Singer 4562 to select abuilt in stitch patterns Submitted on 31-5-2022 at 22:57

    Reply Report abuse

    • My machine has never had a light - it has a red dot that is very hard to see. Answered on 12-7-2022 at 13:35

      Vote up Report abuse

  • I did not see anything about oiling the machine. Do you oil it an if so where do you oil it Submitted on 11-5-2021 at 02:47

    Reply Report abuse

  • how to adjust tension on presser foot on singer 4562 Submitted on 4-5-2020 at 17:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4562 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info