Manual Singer 4562 (page 4 of 44) (English)

616559

4

Zoom out

Zoom in

Previous page

1/44

Next page

4

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic safety precautions

should always be followed including the following:

Read all instructions before using this machine.

DANGER

To reduce the risk of electric shock:

• The machine should never be left unattended when

plugged in. Always unplug the machine from the elec-

tric outlet immediately after using and before clean-

ing.

• Always unplug before changing light bulb. Replace

bulb with the same type rated 15 watts. Be sure to

replace the face plate which covers the light bulb

before operating the machine.

WARNING

To reduce the risk of burns, fire, electric shock or injury

to persons:

• Be sure that the electrical voltage of the socket outlet

(wall receptacle) is the same as the rated voltage of

the motor.

• Use this machine only for its intended use as

described in this Operator's Guide. Use only attach-

ments recommended by the manufacturer as con-

tained in the Operator's Guide.

• To disconnect, turn all controls to the off ("0") posi-

tion, then remove plug from outlet.

• Disconnect the power-line plug from the socket outlet

or switch the machine off when making any adjust-

ments in the needle area, such as threading needle,

changing needle, changing needle plate or changing

presser foot, etc.

• Always unplug the machine from the electrical outlet

when removing covers, lubricating, or when making

any other user servicing adjustments mentioned in

the Operator's Guide.

• Do not attempt to adjust the motor belt. Contact your

nearest Service Center should any adjustment be

required.

• Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

• Handle the foot controller with care and avoid drop-

ping it on the floor. Be sure not to place anything on

top of it.

• Always use the proper needle plate. The wrong plate

can cause the needle to break.

• Do not use bent needles.

• When sewing, keep fingers away from all moving

parts. Special care is required around the sewing

machine needle.

• Do not pull or push fabric while stitching. This may

deflect the needle causing it to break.

• Before removing the bobbin case, remove plug from

the socket outlet.

• For double insulated machines, when servicing, use

only identical Singer replacement parts. See instruc-

tions for Servicing of Double-lnsulated Appliances.

• Never operate the machine if it has a damaged cord

or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return

the machine to the nearest authorized dealer or

Service Center for examination, repair, electrical, or

mechanical adjustment.

1

thread continues to look like a birds nest on back of fabric. Tension????? Submitted on 2-6-2022 at 20:31
Reply Report abuse
- Mine started this and I took it to be repaired - the tension control had to be replaced. When I got it back - it still did that - but the tension control had been fixed so I was able to adjust the stitches to be tighter. Try the tension. Answered on 12-7-2022 at 13:32
  Vote up Report abuse
is there lights on Singer 4562 to select abuilt in stitch patterns Submitted on 31-5-2022 at 22:57
Reply Report abuse
- My machine has never had a light - it has a red dot that is very hard to see. Answered on 12-7-2022 at 13:35
  Vote up Report abuse
I did not see anything about oiling the machine. Do you oil it an if so where do you oil it Submitted on 11-5-2021 at 02:47
Reply Report abuse
how to adjust tension on presser foot on singer 4562 Submitted on 4-5-2020 at 17:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Singer 4562 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4562 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info