Manual Singer 44S CLASSIC (page 23 of 65) (English, French, Spanish)

617492

Zoom out

Zoom in

1/65

This is a simple operation but it is important to carry out correctly as

by not doing so .

- Start by raising the needle to its highest point (1), and continue

turning the handwheel* counterclockwise until the needle just

slightly begins to descend. You must raise the presser foot to

release the tension discs.

For safety, it is strongly suggested you turn off the power

before threading.

- Lift up the spool pin. Place the spool of thread on the holder with

the thread coming off the spool from the back as shown and

place appropriate spool holder next to the spool. For small

thread spools, place small side of spool holder next to spool. (2)

- Draw thread from spool through the upper thread guide (3) and

pulling thread through pre-tension spring as illustrated. (4)

- Thread tension module by leading thread down right channel. (5)

During this process it is helpful to hold the thread between the

spool and thread guide, as this will help to seat the thread

between the tension discs.

- At the top of this movement pass thread from right to left through

the slotted eye of the take-up lever and then downwards again.

(6)

- Now pass the thread behind the horizontal thread guide, and

then behind the thin wire needle clamp guide (7) and then down

to the needle which should be threaded from front to back.

- Pull about 6 - 8 inches of thread under the presser foot to the rear

beyond the needle eye. Trim thread to length with built-in thread

cutter. (8)

* Never turn the handwheel away from you as this may cause the

timing to be disrupted. Always turn the handwheel

counterclockwise (towards you).

several sewing problems could result

Note:

3 4

Threading the Upper Thread

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 44S CLASSIC in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 44S CLASSIC Manual

Product: