617490

Singer 4452 HEAVY DUTY Manual

55
Zoom out
Zoom in
Previous page
1/72
Next page
48
The Clearance Plate is used to aid in removing or replacing
needles. It can also be used to help stitch over thick seams, such
as when hemming jeans. The presser foot tilts as it sews on and
off thick seams areas. The Clearance Plate keeps the presser
foot level when stitching over thick areas, preventing the needle
from hitting the opening in the presser foot.
- Use the hole in the Clearance Plate to hold the old needle while
it is still on the machine. Slide the Clearance Plate up onto the
needle, starting at the point of the needle and moving the tool
upward on the needle.
- While holding the old needle with the Clearance Plate, loosen
the needle clamp screw. Remove the needle.
- Insert the new needle into the hole in the Clearance Plate.
- While holding the Clearance Plate, guide the needle into the
needle slot, making sure that the flat side of the needle is toward
the back of the machine.
- Tighten with a screwdriver to secure, and then remove the
Clearance Plate from the needle.
- Prepare the jeans hem and pin it in place.
- Begin stitching the hem, but stop sewing when the presser foot
starts to climb, but before the needle reaches the seam.
- Turn the hand wheel toward you to lower the needle into the
fabric. Raise the presser foot using the presser foot lifter.
- From the back side of the presser foot, insert the Clearance
Plate up to the seam allowance (you will notice that the presser
foot is now level). Lower the presser foot.
- Begin sewing slowly, and continue until you have stitched across
the seam.
- After you have sewn across the seam, remove the Clearance
Plate, then continue sewing.
Needle Replacement (1):
Sewing Denim Seams (2):
Clearance Plate
EN
1
2
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4452 HEAVY DUTY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4452 HEAVY DUTY in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info