459434
21
Zoom out
Zoom in
Previous page
1/40
Next page
38
39
Pour utiliser l'enfile-aiguille automatique, enfilez la machine en vous arrêtant à l'aiguille,
puis réglez la machine de la façon suivante:
Para usar el ensartador automático de aguja, ensarte la máquina, y deténgase en la aguja,
luego ajuste la máquina como sigue:
Enfilage de la machine
7
7
Enfilage de la machine
Automatic needle threader (only model 4210)
Enfile-aiguille automatique
(4210 uniquement)
Ensartando la máquina
(sólo 4210)
Tournez le volant vers vous jusqu'à ce que
l'aiguille soit dans la position la plus haute.
Tirez le fil vers la gauche.
Abaissez le pied presseur.
Poussez la manette de l'enfile-aiguille automatique vers
le bas et positionnez le fil conformément à l'illustration.
Abaissez la manette de l'enfile-aiguille automatique
jusqu'à ce que le crochet métallique passe dans le chas de
l'aiguille. Faites passer le fil dans l'extrémité crochetée,
puis tirez vers le haut.
Relâchez en même temps la manette de l'enfile-aiguille et
le fil. L'aiguille est alors enfilée.
Position de l'aiguille:
centrale
Posición de aguja:
Centro
Largeur du point:
point droit
Ancho de la puntada:
Recta
Gire el volante hacia usted hasta que la aguja
esté en la posición más alta.
Baja la palanca del prensatelas
Jale el hilo a la izquierda.
Jale la palanca del ensartador automático de aguja hacia
abajo y coloque el hilo como muestra la imágen.
Jale hacia abajo el ensartador automático hasta que el gancho
de alambre pase por el ojo de la aguja. Guíe el hilo por el
extremo del gancho y jale el hilo hacia arriba.
Libere la palanca del ensartador y el hilo al mismo tiempo,
así la aguja se ensartará de forma automática.
Ensartando la Máquina
Ensartando la Máquina
To use the Automatic needle threader; thread the machine, stopping at the needle, and set
the machine as follows:
Needle position: Center
Stitch width:
Straight
Turn handwheel counter clockwise until the
needle is in the highest position.
Lower the presser foot lifter.
Pull thread to the left.
Pull the Automatic needle threader lever down, and place the
thread as illustrated.
Pull the automatic needle threader down until the wire hook
passes through the needle’s eye. Guide the thread into hooked
end and pull the thread upward.
Release the threader lever and thread simultaneously, and needle
will be threaded automatically.
Threading the machine
Threading the machine
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4210 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 4210

Singer 4210 User Manual - German, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info