459434
14
Zoom out
Zoom in
Previous page
1/40
Next page
Appuyez sur la vis du pied presseur. Le pied presseur
s'enclenche.
Presione hacia abajo el tornillo para que el prensatelas
encaje en su lugar.
6
24
Généralités
Mettre en place le pied presseur à enclenche
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Abaissez de pied presseur.
Relevez de pied presseur.
Alignez le pied sous le support de pied presseur.
Baje la palanca del prensatelas.
Alinee el pie prensatelas debajo del zanco (sujeta
prensatelas)
Colocando el prensatelas de colocación instantánea
Gire el volante hacia usted hasta que la aguja esté en la
posición más alta.
Levante la palanca del prensatelas.
Aspectos básicos de la máquina
Attaching snap-on presser feet
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter.
Align the foot under the presser foot holder/shank.
Lower presser foot lifter.
Press down on the screw to snap foot into place.
Machine basics
Pour mettre en place un pied presseur à talon visser ou un
support de pied presseur :
Alignez le talon de pied presseur et la vis du pied presseur
avec le trou de la tige du pied. Serrez la vis dans le sens des
aiguilles d'une montre.
Changer le pied presseur sur talon visser
25
Généralités
6
Retirer la vis du pied presseur, le pied presseur et le
talon de pied presseur.
À l'aide du tournevis, dévissez dans le sens inverse des
aiguilles d'une montre pour desserrer la vis du pied
presseur.
Relevez le pied presseur.
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Cambio del prensatelas a tornillo
Gire el volante hacia usted hasta que la aguja esté en la
posición más alta.
Levante la palanca del prensatelas.
Usando el destornillador, gire el tornillo en sentido
contrario a la manecillas del reloj para aflojar el sujeta
prensatelas / zanco.
Quite el tornillo, el sujeta prensatelas / zanco y el
prensatelas.
Para colocar el sujeta prensatelas / zanco, apriete el
tornillo en la abertura de la barra presionadora en sentido
de las manecillas del reloj. Oj.
Aspectos básicos de la máquina
Removing
Retirer
Remoción
Changing screw-on presser feet or shank
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter.
Using a screwdriver, turn the screw counter-clockwise to loosen
presser foot screw.
Remove presser foot screw, presser foot and foot holder/shank.
To attach a screw-on presser foot or shank:
Align the presser foot holder and presser foot screw with the
opening in the presser bar. Tighten the screw clockwise.
Machine basics
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4210 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 4210

Singer 4210 User Manual - German, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info