459433
19
Zoom out
Zoom in
Previous page
1/40
Next page
Fermez la plaque transparente du compartiment à canette
en laissant dépasser un bout de fil de 15 cm.
Removing the bobbin / Retirer la canette / Retirando la bobbina
34
Enfilage de la machine
7
Cierre la placa transparente, dejando una hebra de
6 centimetros.
Ensartando la Máquina
Close bobbin visor slide plate, leaving a 6” thread
tail.
Threading the machine
Tournez le volant vers vous jusqu’ à ce que l’aiguille soit
dans la position la plus haute.
Gire el volante hacia usted hasta que la aguja esté en la
posición más alta.
Relevez le pied presseur.
Tirez la plaque transparente vers vous.
Retirez la canette avec le bout du doigt.
Levante la palanca del prensatelas
Jale la placa transparente hacia delante para dejar al
descubierto el área de la bobina.
Usando las uñas, quite la bobina de la caja bobina.
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter.
Pull the clear bobbin slide plate forward to open bobbin area.
Using your fingernail, remove bobbin from bobbin case.
Tournez le volant vers vous jusqu'à ce que l'aiguille soit
dans la position la plus haute.
Relevez le pied presseur.
Enfiler le fil d'aiguille / Enhebrado de la aguja
35
Placez la bobine de fil sur le porte-bobine horizontal. Fixez
le fil dans la bonne position avec le grand ou le petit
étrier de bobine, suivant la taille de votre bobine de fil.
Deslice el hilo en el portacarrete horizontal. Asegure el hilo en
su sitio con el sujetador de carrete pequeño o grande,
dependiendo del tamaño del carrete de hilo.
Tirez le fil de la bobine. Maintenez-le fermement au-dessus du premier guide-fil.
Ensuite, tirez les fils vers le bas pour les introduire dans le guide-fil.
7
Enfilage de la machine
Gire el volante hacia usted hasta que la aguja
esté en la posición más alta.
Levante la palanca del prensatelas.
Jale el hilo del carrete, sostenga con firmeza sobre el primer guía hilos.
Luego bájelo, enganchándolo en guía hilos.
Ensartando la Máquina
Threading the needle /
Turn handwheel counter clockwise until the needle is in the
highest position.
Raise presser foot lifter.
Slide thread onto horizontal spool pin. Secure thread in place
with either the large or small spool pin holder, depending on the
size of your thread spool.
Pull the thread from the spool, hold firmly over the first thread guide. Then push the
thread down, snapping it into the thread guide.
Threading the machine
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 4205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 4205 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Singer 4205

Singer 4205 User Manual - German, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info