570582

Singer 29K73 Manual

4
Zoom out
Zoom in
Previous page
1/13
Next page
TO REMOVE THE BOBBIN
Raise needle bar to its highest point and lift feeding foot
A, Fig. 7 by moving lifter B, Fig. 5 upward.
Press down lever C, Fig. 7 and swing needle plate around
as shown.
Turn hand wheel until point of shuttle is nearest operator,
then lift out shuttle with thumb and forefinger.
Turn shuttle over and bobbin will drop out.
NOTE: For 29K72 machine, move bobbin retaining
spring D, Fig. 7 outward before taking out the bobbin.
Fig. 7. Tacking out the Shuttle.
TO WIND THE BOBBIN
Disengage hand wheel from operating stitching
mechanism by drawing out plunger F, Fig.8 and turning it
slightly to left or right.
Place spool of thread on the spool pin and pass end of
thread through the centre slot or hole in the bobbin. Then
press the bobbin, with slot in the side of the bobbin facing
to the left, as far as it will go on bobbin winder spindle.
Loosen thumbscrew D, Fig. 9 on bobbin winder and push
it down until the rubber ring presses against the rim of the
hand wheel, then tighten screw.
Turn hand wheel over toward you as when sewing and
simultaneously guide the thread with the finger as shown
in Fig. 9.
Fig 8
NOTE: If hand wheel and bobbin winder are fitted on
front of machine, the slot in the side of the bobbin must
face to the outside. The top of hand wheel must then turn
over to the right (clockwise) as when sewing to insure
properly wound bobbins.
When bobbin is sufficiently full, remove it from the
spindle. Loosen thumbscrew D, Fig. 9 on the winder and
move screw upward in slot until the rubber ring is out of
contact with the hand wheel, then tighten, thumb screw.
Fig. 9. Winding the Bobbin
Re-engage the hand wheel with the stitching mechanism
by turning plunger F, Fig. 8 slightly while simultaneously
turning the hand wheel slowly until the plunger enters the
hole in the inner disc.
4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 29K73 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 29K73 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info