459420
87
Zoom out
Zoom in
Previous page
1/94
Next page
80
GB
* The evenfeed foot accessory is optional. It is not included with this
machine.
It is easier to guide the fabric and you have a better view of the seam
when using the standard, regular foot on your machine. Your sewing
machine offers excellent stitch quality on a wide range of fabrics from
delicate chiffons to multiple layers of denim.
The evenfeed Foot accessory equalizes the feeding of the upper and
lower layers of fabric and improves the matching of plaids, stripes and
patterns. It also helps to prevent uneven feeding of very difficult
fabrics.
1. Lift the presser foot lifter to raise the presser foot bar (1).
2. Remove the presser foot holder by unscrewing (counterclockwise)
the presser bar attaching screw (2).
3. Attach the evenfeed foot to the machine as follows:
i) The arm (3) should fit into above the needle screw and clamp (4).
ii) Slide the plastic attaching head (5) from your left to right so that
it is fitted into the presser foot bar.
iii) Lower the presser foot bar (1).
iv) Replace and tighten (clockwise) the presser bar attaching screw
(2).
4. Make sure both the needle screw (4) and the presser bar attaching
screw (2) are tightly secured.
5. Draw the bobbin thread up and place both the bobbin thread and
the needle thread behind the walking foot attachment.
a.Arm
b.Attaching head
c.Needle bar
d.Needle screw & clamp
e.Presser foot bar
f. Presser bar attaching screw
Always try to sew first without the evenfeed foot accessory which
should be used only when necessary.
c
a
d
a
b
e
f
1
2
3
The evenfeed foot optional accessory
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 2932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 2932 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info