617032
24
Zoom out
Zoom in
Previous page
1/51
Next page
23
SUPER (STRETCH)
PATTERN GROUP
SELECTOR
To select red patterns, push down the
selector. Push it up for blue patterns.
REVERSE STITCH
LEVER
It is recommended to begin, or end
seams with several stitches in reverse
for reinforcement. As long as you are
pressing down this lever, the machine
will continue to feed the fabric
backwards.
PRESSURE
REGULATOR
This control regulates the pressure of
the presser foot on to the feed-dogs.
Insufficient pressure may cause poor
feeding of the fabric, skipped stitches,
or difficulty in guiding the fabric. Too
much pressure may result in feed-
dogs or presser foot marks appearing
on the fabric.
For most fabrics set the control at 3.
For thicker ones increase it to 4 and
for finer ones decrease to a lower
number.
SELECTOR GRUPO DE
PUNTADAS ELESTICAS
Para seleccionar grupo de puntadas
rojos baje la palanca. Súbala para
grupos de puntadas azules.
PALANCA DE LA
PUNTADA DE
RETROCESO
Al empezar o finalizar las costuras se
recomienda realizar diversas
puntadas con el retroceso para el
refuerzo de la costura. Mientras se
está presionando hacia abajo esta
palanca durante la costura, la
máquina seguirá transportando hacia
atrás el tejido.
REGULADOR DE
PRESION
Este control regula la presión de la
pata prensatelas sobre el transporte
de dientes. Una presión insuficiente
puede causar un pobre transporte del
material, saltos de puntada ó
dificultades en guiar el tejido.
Demasiada presión puede producir
marcas en el tejido, por causa de los
dientes del transporte o la pata
prensatelas.
Para la mayoría de tejidos, poner el
control al . 3. Para tejidos gruesos
poner al . 4 y para finos reducir un
número.
ENGLISH ESPAÑOL FRANÇAIS
SÉLECTEUR DES
POINTS «SUPER»
Pour sélectionner les motifs rouges,
abaissez le sélecteur. Relevez-le pour
les motifs bleus.
LEVIER DE POINT
ARRIÈRE
Il est recommandé de commencer ou
de terminer les coutures avec
plusieurs points arrière afin d’en
améliorer la solidité. Lorsqu’on
maintient ce levier abaissé en cours
de couture, la machine continuera à
entraîner le tissu vers l’arrière.
RÉGULATEUR DE
PRESSION
Cette commande permet de régulariser
la pression du pied presseur sur les
griffes d’entraînement. Une pression
insuffisante pourra causer un
entraînement trop faible du tissu, des
points sautés, ou des difficultés de
guidage du tissu. Une pression
excessive pourra un marquage du tissu
par les griffes d’entraînement ou par le
pied presseur.
Pour la plupart des tissus, mettre la
commande sur la position 3. Pour des
tissus plus épais, la mettre sur la position
4; pour les tissus plus fins, la mettre sur
une position de numéro plus petit.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 2639 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 2639 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info