Manual Singer 2009 Athena (page 22 of 68) (English, French, Spanish)

616554

Zoom out

Zoom in

1/68

1. Thread the machine with your left hand while gripping the

thread with your right hand. Hook thread to the thread

guide on the needle bar and pull it toward you leaving

about 4” (10 cm) clear.

2. Hook thread to the twin thread guide (A and B).

3. Pull thread gently into the thread cutter/holder to cut and

hold it in place.

4. Pull down the threading lever to its lowest position until the

twin thread guide rotates and stops.

5. Release the threading lever and needle will be threaded

automatically. If it should not return to the original position,

raise it gently by hand.

6. Pull thread loop away from you.

1. Enler la machine avec la main gauche tout en tenant le

l avec votre main droire. Faire passer le l dans le guide

fil situé sur la barre de l’aiguille et le tirer vers vous en

laissant dépasser environ 10cm (4’’).

2. Faire passer le l dans le guide l double (A et B).

3. Tirer le le doucement vers le coupe-l pour le couper et le

maintenir en place.

4. Appuyer sur la barre de l’enfileur jusqu’à ce qu’il soit à sa

position la plus basse et que le guide l double pivote et s’arrête.

5. Relâchez le levier de l’enfileur et l’aiguille sera

automatiquement enlée. S’il ne revient pas à sa position

initiale, relevez-le doucement à la main.

6. Éloignez la boucle de l en la tirant doucement vers l’arrière.

USING AUTOMATIC NEEDLE THREADER



Be sure to raise the presser foot lifter and raise the needle

to its highest position before threading.

Don’t pull thread with strong force or thread may

be pulled off from needle hole after threading.

Ne pas tirer trop fort sur le fil car il pourrait se

désenler de l'aiguille.

Make sure that the guide doesn’t touch fabric, etc. S'assurer que le guide ne touche pas le tissu, etc.

If the needle has not been threaded correctly, re-

thread from step 1.

Si l’aiguille n’a pas été correctement enfilée,

répéter l’opération depuis le niveau 1.

IMPORTANT: If the needle cannot be threaded due to

the nature of thread, manually thread the needle after

hooking thread to the thread guide on the needle bar.

IMPORTANT : Si l’aiguille ne peut pas être enlée de par

la qualité du l, enler manuellement après avoir passé

le l à travers le guide l situé sur la barre de l’aiguille

NOTE:



For smooth threading, it is recommended that

the machine be set for straight stitch (in center

needle position) when using the automatic needle

threader.



Heavy thread cannot be threaded through fine

needle.



Don’t lower the threading lever while the machine is

in operation or the threading hook may be broken.

NOTE :



Pour un meilleur enlage, il est recommandé de regler

la machine sur le point droit ( aiguille au centre) lors

de l'utilisation de l'enlage automatique de l'aiguille.



Un l epais ne peut pas être enlé dans une aiguille

ne.



Ne pas abaisser la barre de l'enfileur lorsque la

machine est en marche car le crochet de l'enleur

pourrait se casser.

Twin thread guide

Guide-l double

Guía doble hilo

Threading hook

Crochet d’enlage

Gancho del ensartador

Thread guide

Guide-l

Guía hilo

Felt disc

Rondelle de feutre

Disco de eltro

UTILISATION DE L’ENFILE-AIGUILLE

AUTOMATIQUE



Veillez à relever le pied presseur et à lever l’aiguille dans sa

position la plus haute avant d'enler le l.

Thread cutter/holder

Coupe-l / support

Cortador de hilo

trouble shooting. my sewing machine (2009 Singer Athena) will only sew 7 or 8 stitches and then stops with a quiet beep. I've switched foot controllers and the results are the same. Everything else on the machine seems to be as it should be. What could be the problem? Submitted on 16-1-2023 at 18:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer 2009 Athena in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer 2009 Athena Manual

Product: