617004
14
Zoom out
Zoom in
Previous page
1/59
Next page
Brancher la machine comme indiqué ci-contre. (1) La fiche de la
machine est dotée de broches normalisées et doit être utilisée avec
une prise de courant conforme aux normes en vigueur. (2)
Débrancher le fil d'alimentation lorsque la machine n'est pas
utilisée.
Le rhéostat contrôle la vitesse de fonctionnement de la machine. (3)
Consulter un électricien qualifié en cas de doute pour brancher la
machine. Débrancher la machine quand celle-ci n'est pas utilisée.
Le rhéostat doit être obligatoirement utilisé avec l'appareil.
Appuyer sur le bouton d'alimentation (A) et déplacer le en position"I"
pour allumer l'ampoule.
La prise de la machine comporte des broches polarisées (l'une
est plus large que l'autre). Afin de réduire les risques
d'électrocution brancher la machine en respectant la taille des
trous de la prise.
Si la fiche n'entre pas complètement dans la prise, inverser le
sens. Si vous rencontrez une difficulté contacter un électricien.
Ne pas modifier la fiche vous-même.
a. Fiche polarisée
b. Prise de terre
Attention:
Rhéostat
Attention:
Lumiere de la machine
REMARQUE IMPORTANTE
FC-1902, KD-1902 (110-120V area)/ FC-2902A KD-2902 (220-
240V area)/ 4C-316B (110-120V area)/ 4C-326G (230V area).
F
Conexión de la máquina a la fuente de
alimentación eléctrica
Branchement de la machine une source
d'alimentation
à
Conecte la máquina a una fuente de alimentación según se ilustra. (1)
Esta máquina está provista de un conector polarizado, que debe
utilizarse con una toma de corriente polarizada adecuada. (2)
Desenchufe el cable de alimentación cuando la máquina no esté
en uso.
El pedal de control regula la velocidad de la máquina. (3)
Consulte a un electricista autorizado si tiene dudas en cuanto a
la conexión de la máquina a la alimentación principal.
Desenchufe el cable de alimentación cuando la máquina no esté
en uso.
Pulse el interruptor principal (A) para el encendido e iluminación.
Esta máquina tiene un conector polarizado (una clavija es más
ancha que la otra).
Para reducir el riesgo de sacudidas eléctricas, este conector ha
de insertarse en una toma de corriente polarizada solamente en
una dirección. Si no se obtiene una salida adecuada, invertir la
polaridad.
Atención:
Control de pedal
Atención:
Luz para coser
NOTA IMPORTANTE
El control de debe utilizarse con la máquina mediantevelocidad
FC-1902, KD-1902 (110-120V area)/ FC-2902A KD-2902 (220-
240V area)/ 4C-316B (110-120V area)/ 4C-326G (230V area).
a. Polarized attachment plug
b. Conductor intended to be grounded
E
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 1512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 1512 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info