616809

Singer 1004 Vivo Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
(5)(6)
RAISING THE BOBBIN THREAD
CHOOSING A STITCH PATTERN
The Pattern Selector Dial is used to select the stitch you want to sew. The numbers on the
dial directly correspond to the display on the front of the machine. Simply turn the dial until
the number of the stitch that you want to sew lines up with the red dot marking above the
dial.
STRAIGHT STITCHING
The straight stitch is the most frequently used stitch for all types of sewing.
1.To begin sewing, first raise the presser foot lifter.
2.Pull both the upper thread and the bobbin thread under the presser foot toward the
back of the machine, leaving about 6” of thread.
3.Place the fabric under the presser foot, then lower the presser foot lifter.
4.Turn the hand wheel counter-clockwise (toward you) until the needle enters the fabric.
5.Start the machine by stepping on the foot controller. Guide the fabric with your hands.
When reaching the edge of the fabric, stop the sewing machine.
6.Turn the hand wheel counter-clockwise (toward you) until the needle is in its highest
position, then raise the presser foot lifter.
7.Draw the fabric to the rear and cut off excess thread with the thread cutter, located on
the side of the machine, as shown.
18
17
THREADING THE UPPER THREAD
(2)(1)
(3)
(4)
Before you start to sew, it will be necessary to draw up the bobbin thread.
Raise the presser foot lifter.
Holding the needle thread loosely with your left hand, turn the hand wheel toward you
(counter-clockwise) with your right hand, first lowering the needle and continuing until
the needle comes to its highest position.
Lightly pull up the top thread, and pick up the bobbin thread, which will appear through
the needle plate slot.
Pull both the top and bobbin thread together toward the back of the machine, under the
presser foot, leaving about 6” clear.
Replace the bobbin cover plate.
(7)
(8)
(5)
(6)
(3)
(2)
(4)
(1)
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 1004 Vivo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 1004 Vivo in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info