474728
14
Zoom out
Zoom in
Previous page
1/70
Next page
Avoid installing behind other electrical and electronic devices as
they may reduce the signal strength and consistency of wireless
communications
The Basestation should be at least 2m away from any other
Bluetooth or Wireless LAN (WiFi) transceiver
Carbon fibre and steel are strong reflectors of RF signals; they
can severely limit the Bluetooth range depending on the relative
position of the Handset and Basestation
Mount in an accessible location for access to pairing functions.
Due to the characteristics of wireless communications a small
alteration in mounting location can make a large difference in
signal strength. A location that is reasonably central in the boat and
reasonably high is favoured.
It is also recommended that the wireless performance is checked
prior to final installation to help decide the optimum location. If
the Handset is to be used as a VHF station the check should also
include audio performance as the range is more limited than the
transfer of data.
The Basestation is connected to the SimNet databus using the cable
supplied. This also supplies power to the Basestation and separate
power is not required. Ensure that the connector on the end of the
cable is in the correct orientation and press firmly into either of the
two Basestation sockets. The spare socket can be used to daisy
chain SimNet to another item of equipment. If the spare socket is
not used insert the supplied blanking plug.
2.5 Connecting to a VHF radio
If the WR20 is to be used as a VHF Handset the Basestation must
be connected to the VHF black box using an accessory cable.
There are two accessory options, the EXPC05 is a 5 meter cable
and the EXPC20 is a 20 meter cable. The end of the cable with the
round connector attaches to the corresponding connector on the
Basestation.
WR20 Remote Commander
14
Installation
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad WR20 Remote-Commander at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad WR20 Remote-Commander in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad WR20 Remote-Commander

Simrad WR20 Remote-Commander User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info