634387
15
Zoom out
Zoom in
Previous page
1/24
Next page
| 13
Operation | FU80, NF80, QS80 User Guide
Follow-up steering
In FU mode you use the lever to set the commanded rudder angle.
Warning: To avoid unintended rudder movement you should
observe the lever position (commanded rudder angle) before
activating the FU mode!
To increase resolution on small rudder angle commands, the
relation between the lever rotation and the commanded rudder
angle is non-linear. When the lever is rotated 20° from mid-position
the rudder will be commanded 5° to port or starboard. A 65° lever
angle will move the rudder to 40°. Max lever rotation will give max
rudder angle. Refer your autopilot installation manual for how to set
max rudder angle.
The rudder will remain in set position until a new rudder angle is
commanded.
AUTO and NoDrift mode
When you select AUTO/NoDrift mode, the system will continue on
the heading/course read from the sensors the very moment you
selected the mode.
Auto mode NoDrift mode
Changing set heading/set course
Use the lever to change set heading in AUTO mode and the set
course in NoDrift mode. The value will change in steps defined by
lever rotation, starting from 0.5°/second at 3° lever rotation, up to
5°/second at max lever rotation.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad U80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad U80 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info