634382
7
Zoom out
Zoom in
Previous page
1/30
Next page
| 5
Operation | TP10, TP22 & TP32 User Guide
Operation
General
The unit powers up in Standby mode indicated by a flashing LED
next to the STBY/AUTO key. The two direction LEDs above the Port
( ) and Starboard ( ) keys are always dimly lit, which provides
night illumination for the keypad. All functions are confirmed
audibly by a beep and visually by the LEDs, so the status of the unit
can always be confirmed at a glance.
¼ Note: The NAV key on the TP22 and TP32 is labeled CAL on the
TP10. Both keys are referenced where applicable.
Autopilot mode
While in Standby mode, the pushrod can be manually driven in and
out by pressing the arrowed Port ( ) and Starboard ( ) keys, which
allows “power steering of the vessel.
To engage Autopilot mode, press the STBY/AUTO key and the
Tillerpilot will lock onto the current course. The LED next to this key
will stop flashing and remain permanently lit as long as the pilot is
in Autopilot mode.
To lock the pilot onto the desired course, either steer the correct
course and then engage the autopilot, or engage the autopilot and
then adjust the heading until the correct course is being sailed (see
Adjusting course” on page 5).
If the STBY/AUTO key is pressed and held, the pilot will beep a
second time and lock onto the previously used heading (this feature
will not be available if the unit has just been switched on).
Adjusting course
In Autopilot mode, precise course adjustments can be easily made:
- Press the Port (
) or Starboard ( ) key once and a 1º course
adjustment will be made in the specified direction. This is
confirmed by a single beep and the Port or Starboard LED will
flash once.
- Press and hold either key and a 10º course adjustment will be
made, confirmed by a double beep and a double flash of the Port
or Starboard LED.
¼ Note: Following any course adjustment in Nav mode (see “Nav
mode” on page 7), the Tillerpilot will gradually return to the
navigation track.
2
STBY
NAV
TACK
STBY
AUTO
STBY
NAV
TACK
STBY
AUTO
STBY
NAV
TACK
STBY
AUTO
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad TP10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad TP10 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad TP10

Simrad TP10 User Manual - German - 30 pages

Simrad TP10 User Manual - Danish - 30 pages

Simrad TP10 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info