28562
166
Zoom out
Zoom in
Previous page
1/178
Next page
Simrad SP60
156
850-164575 / Rev.D
Transceiver Unit
Dust filter
There is a dust filter in the bottom of the Transceiver Unit. To
avoid overheating, this must be inspected, and if necessary,
cleaned once every third month.
The dust filter is accessible from the outside of the Transceiver
Unit, by unscrewing the eight finger nuts in the bottom of the
unit. The filter should be vacuum cleaned, or washed in soap
and water. If washed, the filter must be dried thoroughly before
being reinstalled.
Replacing fuses
The Transceiver Unit is fused with two 8A slow blow main
fuses (F201 and F202) located on the front of the Power Supply.
SP60 Transceiver Unit fuse
locations
(A) = Dust filter
If one of the fuses are blown, the lamp L201 should be lit, while
lamp L202 should be extinguished. If L201 is not lit, check the
fuses on the ship’s main power system.
In addition, the High Voltage Unit is fused with two 8A slow
blow fuses (F204 and F205). If one of these fuses are blown, the
lamp L205 will be lit, while lamp L206 will extinguish.
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SP60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SP60 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info