28562
44
Zoom out
Zoom in
Previous page
1/178
Next page
Simrad SP60
34
850-164575 / Rev.D
Tilt
Manual tilt
In Manual mode the transducer may be tilted within the
systems limits by pressing the Tilt up (arrow) or Tilt down
(arrow) buttons. Pressing either button once changes the tilt
angle in steps of 1 degree. Pressing and holding either button
continuously changes the tilt angle until pressure is removed.
In the Position and Target Tracking modes, the tilt angle will
automatically be adjusted to compensate for the distance to the
tracked position.
Auto tilt
In the Auto Tilt mode the selected tilt angle forms
the centre of the tilt search. The selected tilt limits
are displayed on the tilt indicator by yellow lines
and corresponding numerical values for both the
upper and lower limits.
The centre of the tilt search sector is adjusted by
pressing the Tilt up (arrow) or Tilt down (arrow)
buttons. Sector limits are adjusted by pressing and
holding the Auto button and simultaneously
pressing the Tilt up (arrow) or Tilt down (arrow)
buttons.
Tilt search sector limits can be incremented in steps of 1 degree
to 10 degrees according to the value selected in the in the Tilt
menu.
The Auto Tilt function responds differently with regard to the
training mode selected as follows:
Manual training mode: The transducer automatically
changes the tilt angle after each transmission in steps within
the selected limits.
Auto search training mode: The transducer automatically
changes the tilt angle after each complete search is
performed.
Position and Target Tracking modes: The tilt angle’s search
centre will automatically be adjusted with regard to the
distance to the position being tracked. The transducer will tilt
automatically in steps after each transmission.
Note If the stabilization system is activated, the beamformer will
automatically adjust the tilt angle with regard to the vessel’s
motion (even if manual tilt is selected). The change in the tilt
angle for the beamformer will not be shown on the tilt indicator.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SP60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SP60 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info