28560
189
Zoom out
Zoom in
Previous page
1/224
Next page
SL 30/35 Hull Sonar Operators Manual 974-25007001/2.
0
Troubleshooting and Maintenance Page 7.
5
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
7.4.3 Lower and Raise unit (SL 35 Only)
For the SL 35 only, once a month, check the lower and raise ram unit for oil leakage;
if a small amount of oil is present, clean and monitor on a regular basis. Check the
oil level and top up using Standard Automatic Transmission oil. Do not over-fill the
reservoir; re-install the vent cap.
7.4.4 Tank Flange shaft Bearing, Seals and Sonar Dome (SL 35 Only)
When the ship is dry-docked, remove the sonar dome assembly, clean and remove
marine growth from the dome with a fine scraper or a piece of wood.
Check the tank guide assembly; replace if damaged or worn-out
Remove the tank flange and disassemble the main shaft bearing and seals and
re-build using a special kit that contains all seals, shaft scraper and a new zinc
anode
Using the oil level gauge supplied in the installation kit, remove one of the oil
plugs located on the top of the sonar dome and insert the gage and insure that
the oil level is ok. If not, top up to the proper mark on the oil gage using Shell
Tellus 15.
Note: Do not over fill the sonar dome, space must be allowed for expansion and
contraction due to water temperature changes.
See Part 8 “Attachment and Drawings” for detailed procedure.
7.4.5 SL 35 Shaft and SL30/35 Sonar Dome Damage
The sonar dome and shaft should be inspected for damage. If the sonar dome has
experienced an impact, this could bend the shaft and eventually allow water into the
soundome unit.
7.4.6 Corrosion
If, on examination, corrosion has occurred to the sonar dome, replace the damaged
parts. If corrosion has occurred on the flange assembly, clean the area and seal with
paint to prevent continuation of the corrosion in this area.
189


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SL35 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info