28560
145
Zoom out
Zoom in
Previous page
1/224
Next page
SL 30/35 Hull Sonar Operators Manual 974-25007001/2.
0
Selecting Settings Page 5.1
7
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
5.5.2 Tilt Angle and Beam Coverage
The figure below illustrates the vertical beam width “foot print” of the sonar at
different ranges
8 Degrees Beam Angle
100 m 200 m 300 m
14 m
26 m
44 m
5.6 PITCH AND ROLL CALIBRATION
For the procedure to calibrate the Pitch and Roll offset, refer to Part 6, paragraph
6.6.11
5.7 KEY SETTINGS
The following section will explain some of the key settings for the SL 35 Hull Sonar
in order to maximize the performance.
5.7.1 AGC Setting
The Automatic Gain ControlAGC algorithm increases the gain during the low
acoustic return and reduces the gain during strong acoustic returns. The speed with
which the gain is adjusted is determined by the setting of the “RX Gain Response”
as explained in the next paragraph.
145


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SL35 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info