28560
13
Zoom out
Zoom in
Previous page
1/224
Next page
SL 30/35 Hull Sonar Operators Manual 974-25007001/2.
0
System Familiarization Page 1.
5
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
1.1.3 Display
The display monitor for the SL 30/35 Sonar can be either a VGA “CRT” or LCD
Simrad ruggedized monitor, but any commercially available monitor may be used. In
order to have the full benefit of high resolution, you should use a Simrad LCD
Monitor.
1.1.4 Processor Unit
The SL 30/35 Sonar Processing Unit is a ruggedized computer, which can interface
with other auxiliary equipment (Control Panel, Interface Unit, GPS, Echo Sounder
and Trawl Systems, etc.). The processor unit runs on the Microsoft Windows XP
Operating System. The SL 30/35 Sonar System software provides a mechanism for
the sonar operation. It is operated through the Main Control Panel to enable the
sonar selection, tilt, range, gain and cursors; moving the mouse pointer over the
toolbar will allow the operator to perform certain operations with a simple mouse
click. A flush mounted Control Panel is provided to simplify the operation of the
system.
The rear panel of the processing unit contains the connectors for AC and DC power,
Monitor port, two RS232 Serial Ports, Keyboard, Mouse, Printer, Network LAN and
USB port. The Network LAN port can be used to connect a remote workstation, or to
download data from the processing unit.
Note: A security key (or “dongle”) must be attached to the parallel port to enable
full operation of the system.
1.1.5 Control Panel and Interface Unit
The SL 30/35 Control Panel contains all necessary control functions for operating
the sonar. As some of the functions are used more frequently than others, the
control buttons are arranged in function groups, as Sector Train, Tilt, Scan Speed,
Range, Display Mode, User Setting and Utilities. The Power ON and OFF buttons,
the Lower and Raise buttons are also provided for on the SL 35 Hoist Control.
Note: All sonar operations may also be controlled from the integrated roller ball, or
from an optional remote standard mouse.
The SL 30/35 Interface Unit is incorporated into the Control Panel assembly,
providing the interface telemetry communication between the Processing Unit and
the Transceiver Unit in the sonar room.
Note that only one signal cable is used for communication between the Interface
Unit and the Transceiver Unit.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SL35 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info