28536
21
Zoom out
Zoom in
Previous page
1/40
Next page
Using the menus
School: This parameter is used to obtain information of the
volume estimation of a school in the automatic target tracking
program.
Dead reckoning: T his function is used to improve the position
of the historical track line from the vessel, relative to the
actual position of the drifting shing gear.
Stabilizer: When this function is active, the sonar will
automatically adjust the sonar picture to compensate for the
ship’s movements in the sea.
Movements: This function makes it possible to estimate the
position of a tracked school at a given time.
Track window: This command enables you to adjust the
size of the window the sonar places on the chosen target. A
larger track window will enable the system to track a large
target more easily, but the system will be more susceptible to
background noise. Smaller targets may be ignored if there is a
lot of noise in the area, as the system will t rack the strongest
echo within the track window.
Wind direction: The wind marker is show in the outer area
of the echo presentation as a white arrow. This arrow can
be manually adjusted for indication of the wind or current
direction, or automatically show the wind direction if a wind
sensor is connected.
Wind speed: This is not a parameter. It is only a read-out of the
current wind speed providing that a wind sensor is c onnected.
Sort modes: Click to access the Sort Modes menu. This menu
is used to select the display modes to be activated by the four
Mode buttons on the Sonar Operating Panel. The four upper
display modes in this menu will always be the four modes
provided by the four
Mode buttons in the order they are sorted.
External sync: This function makes it possible to eliminate
interference from other Simrad sonars on board your vessel. If
the sonars are connected together, you can use these settings
to synchronise their transmissions.
Scienticoutput: This is an optional functionality designed to
be used when the sonar is used for scientic purposes. When
enabled, the sonar will provide special information on an
ethernet port.
Fish alarm: This function makes it possible to set up the sonar
to warn you when a school of sh are detected inside the
selected sector. The selected sector is displayed with white
dashed lines in the horizontal sonar picture.
User setting: This function is used to store the parameter
settings for different type of sheries, or individual user
related settings.
302656/A 19
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SH40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SH40 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info