28536
18
Zoom out
Zoom in
Previous page
1/40
Next page
Simrad SH40
How to hide the menu
The menu is normally located on the right hand side of the
display, but if you don’t need it, you can easily remove it.
1 Press the
Menu button on the Sonar Control Panel.
The
Menu button will act as a toggle switch. Press once to
remove the menu, and one more time to retrieve it.
You can also use an alternative method:
1 Press the
Display tab.
2 Click the
Full screen: Off button.
In order to restore the previous menu location:
1 Move the cursor to the far left or far right side of the display
2 Observe that the menu appear.
3 Click the
Full screen: On button.
Horizontal menu
The Horizontal menu is used to control the horizontal
presentations. The parameters chosen are present in all display
modes. When a horizontal parameter setting is selected and
dened in one mode, the chosen settings will automatically be
applied to all modes.
Range: Select the current range.
Tilt: Select the sonar beam’s vertical angle.
Bearing: Add a white bearing line to your sonar picture.
Gain: This setting controls the a mplication of the received
echoes.
Pulse form: The standard pulse form is FM Auto. If you
experience a lot of reverberation from the bottom, decrease
the pulse length. In good water conditions while searching for
scattered sh, you may well use setting
CW Long.
TX Power: This button switches the transmission power on
or off.
Frequency: On the SH40 you can alter the sonars transmission
frequency. This is very useful if you have other vessels in the
vicinity. Remember that lower frequencies will increase the
range of your sonar, but also give you a wider beam.
TVG: Time Varied Gain. This function will automatically
adjust the gain in the sonar to compensate for geometric
spread and absorption.
RCG: Reverberation Controlled Gain. This function will
automatically remove unwanted reverberation from the
bottom or from the sea surface. It may however also remove
scattered sh.
16
302656/A
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad SH40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad SH40 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info