665013
14
Zoom out
Zoom in
Previous page
1/29
Next page
14 |
Installation | RS90 Installation Manual
Installation
Positioning
Transceiver
Make sure that the position of the transceiver:
• Is at least 1 m (39 inches) from the VHF antenna.
• Allows easy connection to the 12 VDC electrical source, the antenna,
and the NMEA 2000 connection.
• Is at least 45 cm (18 inches) from any magnetic compass to avoid
magnetic deviation of the compass during radio operation.
• Provides suitable space for installing the wired handset cradle(s)
nearby. (A 20 m extension cable is available as an optional extra.)
• Provides reasonable access to the wiring via the top panel.
The transceiver can be positioned vertically on a bulkhead or
horizontally. Avoid positions that might get wet or hot, such as in
the engine compartment or close to the bilge.
Ideally, the transceiver is positioned vertically with the wiring glands
facing downwards in order to prevent the ingress of water.
DSC warning label
The DSC warning label should be positioned close to the wired
handset.
Installing the transceiver
1. Hold the transceiver at the chosen location and mark the 4 hole
positions onto the mounting surface.
2. Drill the 4 holes where marked (maximum diameter 3.5 mm).
3. Attach the transceiver using screws or pan head machine screws.
4
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad RS90 VHF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad RS90 VHF in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad RS90 VHF

Simrad RS90 VHF User Manual - English - 129 pages

Simrad RS90 VHF User Manual - German - 130 pages

Simrad RS90 VHF Installation Guide - German - 28 pages

Simrad RS90 VHF User Manual - French - 128 pages

Simrad RS90 VHF Installation Guide - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info