583423
21
Zoom out
Zoom in
Previous page
1/64
Next page
20 RS25 Operation and Installation Manual
2-9 Subscribe or Un-Subscribe the AHK05 handset (HS SETTING)
AHK05EU/AHK05US only
The optional Handset functions with the base unit. It can not operate on it’s own. Ensure the base unit
is turned ON when using the handset.
You can use the AHK05 wireless handset to control and communicate with AHK05 base unit from almost
anywhere aboard your vessel. Before you rst use the handset, it must rst be subscribed to the base
unit.
Subscribing the AHK05 Handset to the RS25 base unit:
1. Ensure the handset is fully charged.
2. Turn the base unit on, and select “HS SETTING”,”SUBSCRIBE”, and “YES” from the SETUP menu.
“SUBSCRIBE WAITING” appears on the base unit LCD.
MENU SELECT
> HS SETTING
GPS SIM
RESET
SUBSCRIBE
WAITING
EXIT -> CANCEL
SUBSCRIBE
> YES
NO
HS SETTING
> SUBSCRIBE
CLEAR CODE
3. Turn the AHK05 handset ON then press and hold SCAN key to enter the subscribing mode. The AHK05
will display “SUBSCRIBING” on its LCD to indicate it is waiting for response from the base unit.
Note: Your handset must be within operational range of the base unit.
4. After successful subscription, a “bi” tone will be emitted from the handset then display “CONNECTING,
PLEASE WAIT” on the LCD. The AHK05 will then operate normally with the base unit.
5. Up to 2 handsets can be subscribed to one base unit. Before you subscribe the 2nd handset to the
base unit, make sure the 1st handset is powered o. You can then follow the steps 1-4 to subscribe
the 2nd handset.
Note: If subscribe is not successful, or you wish to un-subscribe a handset from your base unit to
use on another base unit, it is recommended to clear the existing code rst as follows:
To Un-Subscribe the AHK05 Handset from the RS25 Base unit:
1. On the base unit, select “HS SETTING”, “CLEAR CODE” and “YES” from the setup menu.
MENU SELECT
> HS SETTING
GPS SIM
RESET
HS SETTING
SUBSCRIBE
> CLEAR CODE
CLEAR CODE
> YES
NO
2. After a few seconds, the handset will display “SEARCH HOST” and no longer be subscribed to the
base unit.
SIGNAL LOST!
SEARCH HOST
PLEASE WAIT
3. The handset can be subscribed to another base unit if needed.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad RS25U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad RS25U in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info