583424
31
Zoom out
Zoom in
Previous page
1/64
Next page
30 RS25 Operation and Installation Manual
4-6-2 Enable ATIS Functionality (ATIS FUNC) (EU only)
ATIS functionality will operate only after the ATIS MMSI has been entered (see previous section).
1. Select DSC SETUP, then ATIS FUNC.
2. The cursor is at ON. Select ENT or push the ro-
tary knob to enable the ATIS functionality and
automatically disable DSC functionality. The
ATIS annunciator appears on the screen.
Its not possible to have both ATIS ON and DSC ON simultaneously. When you enable one, the other will
turn OFF. If DSC and ATIS are both OFF, you must turn DSC ON for normal DSC operation.
The annunciator on the LCD shows you the current mode: if the DSC annunciator is shown, DSC is op-
erational; if the ATIS annunciator is shown, ATIS is operational.
4-7 DSC Functionality (DSC FUNC)
DSC functionality can be disabled but this is not recommended.
1. Select DSC SETUP, then DSC FUNC.
2. The cursor is at ON. Press ENT or push the
rotary knob to enable the DSC functionality
and automatically disable ATIS functional-
ity. The DSC annunciator appears on the
screen.
Its not possible to have both ATIS ON and DSC ON simultaneously. When you enable one, the other will
turn OFF. If DSC and ATIS are both OFF, you must turn DSC ON for normal DSC operation.
The annunciator on the LCD shows you the current mode: if the DSC annunciator is shown, DSC is op-
erational; if the ATIS annunciator is shown, ATIS is operational.
4-8 Response Type to LL Polling Calls (LL REPLY)
You can set up the radio to respond to an LL polling request in one of three ways:
MANUAL reply manually or ignore to each incoming LL polling request from your buddies.
AUTO automatically replies to an incoming LL polling request from any of your buddies.
OFF ignores all incoming LL polling requests from your buddies.
1. Select DSC SETUP, then LL REPLY.
2. Select your mode of response and press ENT
or push the rotary knob to conrm.
4-9 Mute the Notification Ringtone
If you have requested LL position data from any buddies, the RS25 will notify you of any incoming data
by sounding 2 friendly ringtones. If desired, you can mute this audible notication as follows:
1. Select DSC SETUP, then LL RING.
2. Select OFF (o) to mute the ringtones.
3. Press ENT to conrm your choice and return
to the menu.
DSC SETUP
ATIS MMSI
ATIS FUNC
> DSC FUNC
DSC FUNC
> ON
OFF
DSC SETUP
ATIS FUNC
DSC FUNC
> LL REPLY
LL REPLY
> MANUAL
AUTO
OFF
DSC SETUP
DSC FUNC
LL REPLY
> LL RING
LL RING
> ON
OFF
DSC SETUP
GROUP SETUP
ATIS MMSI
> ATIS FUNC
ATIS FUNC
> ON
OFF
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad RS25E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad RS25E in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info