23336
309
Zoom out
Zoom in
Previous page
1/322
Next page
Software updates
297
850-165186 / Rev.B
Procedure
In order to upgrade the MMI software, observe the following
procedure.
1 Switch off the PI54.
2 Connect the upload cable between a serial line connector
on the computer and the NMEA2 connector on the rear
side of the PI54 Operator Unit.
3 On your computer, locate the MMI software upgrade file
(on .zip format).
4 Unpack the file to a chosen directory on your harddisk.
- Microsoftt XPt supports the zip format, and will
open the file in a new folder. If you run older operating
systems, you will need the WinZip utility available
from www.winzip.com.
5 Allow the installation files to unpack to the chosen
directory.
6 Click the Start button at the lower left corner of your
computer display, and select Run.
7 Go to the directory you unpacked the installation files to
(Step 7), and select upload.exe in the Upload
subdirectory. Click Ok .
8 Switch on the PI54.
- The upload program will automatically detect which
serial line port (COM port) you have connected the
upload cable to, and that a PI54 cabinet is connected.
- The upload program will further check your current
software version. If the current MMI software on your
PI54 Operator Unit is newer than the version you
attempt to install, it will inform you of this.
- Finally, the upload program will start the data transfer.
- The transfer progress can be monitored in the message
field.
9 Allow the transfer process to complete.
10 Switch off the PI54 Operator Unit.
11 Disconnect the upload cable.
12 Switch on the PI54 Operator Unit.
13 Verify that the new software version is shown in the Status
display.
309


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad PI54 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad PI54 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad PI54

Simrad PI54 User Manual - Norwegian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info